Sea Dog 081261 Stainless Tie Down Eye Strap

Used with 1" wide webbing to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc. This forged stainless tie down eye strap can be used for a multitude of applications.

Sea Dog 081262 Stainless Tie Down Eye Strap

Used with webbing up to 2" wide to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc. This forged stainless tie-down eye strap can be used for a multitude of applications.

Sea Dog 201025 Offset Short Hinge 304 Stainless Steel Pair

Great for interior and exterior applications such as cabinets, hatches, folding tables, or seats where mounting space is tight. Five pre-drilled holes.

Sea Dog 201072 Butt Hinges 2" x 2" Stamped 304 Stainless

These are an economic stamped 304 Stainless steel set of butt hinges.

Sea Dog 201080 Butt Hinges 2" x 3" Stamped 304 Stainless

Pair of corrosion-resistant stamped 304 Stainless steel butt hinges.

Sea Dog 201555 Round Side Two Pin Hinge 304 Stainless 3" x 1-1/2" Pair

Two Pin Hinges open 180°, making them ideal for folding tables or doors that must fold back flat. Good for use in tight spaces.

Sea Dog 201590 Offset Butt Hinge

To be mounted on the front surface of a raised door with a 3/8" offset on one side.

Sea Dog 201914 Semi-Concealed Hinge Stamped 304 Stainless Pair

Semi-Concealed Hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door.

Sea Dog 204280 Hatch Hinge Forged Brass Each

Chrome plated forged brass version.

Sea Dog 204391 Brass Strap Hinge 4" x 1-1/6" Pair

Cast polished brass.

Sea Dog 205140 Butt Hinges 1-5/8" x 1-1/2"

Investment cast 316 stainless steel.

Sea Dog 205285 Long Reach Hatch Hinge Cast 316 Stainless Each

Particularly well suited for wider doors or hatches where a greater spread is required on the hinges.

Sea Dog 205390 Strap Hinge 4-1/8" Stainless Steel Pair

Strap hinges consist of two long, narrow leaves of equal length extending from a single knuckle. Commonly used for gates, dock box lids, fish holds, etc.

Sea Dog 205420 Investment Cast Door Hinge Pair

2-1/16" x 2-1/16" Wide with six #10 fastener holes.

Sea Dog 206530 Door Hinge 2-7/8" Zinc Chrome Plated Pair

Sea Dog 221120 Safety Hasp Stainless 2-11/16" x 1"

Stamped 304 stainless steel hasp 2-11/16" long by 1-1/6" wide.

Sea Dog 221320 Table Brackets 304 Stainless Pair

One 4-piece set includes two wall and two table brackets.

Sea Dog 221810 Spring Loaded Flush Ring Pull 2-9/16" x 2-3/16".

Stamped 304 Stainless Steel Pull Ring is spring-loaded to prevent rattling and says flush against the base, even in vertical applications.

Sea Dog 221815 Spring Loaded Flush Ring Pull 1-3/4" x 1-1/2"

Spring loaded flush Ring Pull, 304 Stainless steel electro polished.

Sea Dog 221820 Spring Loaded Flush Hatch Pull

The spring loaded handle prevents rattling and stays flush inside the base.

Sea Dog 221954 Large Round Hatch Handle Latch SS

Requires a 3” size cut-out hole. Installs with a back mounted stainless nut.

Sea Dog 222004 Solid Brass Body Padlock

Solid brass body 1/4" diameter hasp.

Sea Dog 222120 Safety Hasp Chrome Brass 3" x 1"

3" long by 1" wide. Constructed of sand cast brass with a chrome-plated finish.

Sea Dog 222130 Swivel Hasp Chrome Plated Brass

3" long and constructed of sand cast brass with a chrome-plated finish.

Sea Dog 222410 Flush Chrome Plated Brass Pull Ring

Outside dimensions are 2-1/2" x 2".

Sea Dog 270250 Deck Hinge Side Mount Stainless Steel 1/4 Pin

Sea Dog 270510 Stanchion Cap 7/8" Diameter

Fits stainless steel tubing with O.D. of 7/8". The eye diameter is 5/16".

Sea Dog 299981 Release Pin & Lanyard 1/4"

1/4" x 15/16" Quick Release Pin with a 6" lanyard.

Sea Dog 329300 Adjustable Antenna Base

This Adjustable Antenna Base features dual swiveling mounts for full adjustability and a ratchet-style handle for side or deck mounting.

Sea Dog 337315 Hose Thru Vent 3" White

Injection Molded ABS. Hole center: 2-13/16", Depth: 2-7/16", Height/Width: 3-11/16", Hose / Hole vent size dia. 3" / 3-1/8"

Sea Dog 337415 Hose Thru Vent 4" White

Injection Molded ABS. Hole center: Hole center: 3-9/16, Depth: 3", Height/Width: 4-15/16, Hose / Hole vent size dia. 4". Fastener: #8 FH

Sea Dog 352210 Gas Tank Vent Investment Cast 316 Stainless Steel

5/8" Hose barb securely connects to the vent hose. It provides airflow and compensates for changes in tank level due to consumption, and temperature-related expansion and contraction.

Sea Dog 357105 Gas Tank Vent White Injection Molded Nylon

UV resistant white injection moulded nylon construction. 5/8" hose barb securely connects the vent hose.

Sea Dog 357393 Hose Klip Water Hose Lock for Deck Fills

Hose Klip stops your water hose from coming out of the deck fill during filling.

Sea Dog 423040 Bilge Pump Panel with Circuit Breaker

3-Way switch allowing both Manual and Automatic switching of the bilge pump. Injection-moulded ABS for maximum durability and corrosion resistance.

Sea Dog 580570 Brass Ribbed Open 2" Oarlocks Pair

Elegant brass ribbed horn oarlocks.