Drink Holders and Accessories

Snapit V005 Binnacle Mounted Drink Holder

Fits pedestal guard tubing from 3/4" through 1-3/8" diameter. Adjusts to accommodate 9-1/2", 12" and 12-1/2” center to center pedestal guards.

Sea Dog 325038 3 Pole Side Mount Rod Holder White

With a built-in knife, pliers, and lure holder. Accommodates three rods up to 1-3/4” in diameter.

Sea Dog 588000 Black Flush Mount Drink Holder 2" Deep

Two inches deep and accommodates drink containers up to 2-7/8" in diameter with a 3" diameter hole for installation.

Attwood Swivel Drink Holder - Chrome

Chrome plated steel wire drink holder. Includes gimbaled surface mount bracket

Beckson Soft-Mate Can and Air Horn Holder - Suction Cup

Soft-Mate Can Holder with suction cup mount is an ideal solution for temporary mounting, or when you don't want to drill holes for a can holder. Three clear plastic suction cups provide tremendous holding power.

Beckson Soft-Mate Mini PVC Holder White

The safety-soft flexible PVC holder won`t hurt the user or the equipment.

Boatmate Drink Holder with Cozy

Handy, compact drink holder has a suction cup that can be placed on the back or on the bottom.

Boatmates Drink Holder Plus

Holds your favorite beverage, a couple of lures, and has a place for pliers, sunglasses, etc.

Drink Holder - Double - Stainless Steel

Stainless steel double drink holder. 3-7/16" inside diameter. 3-1/2" height.

Drink Holder - Lifeline Hangover - Stainless Steel

Stainless steel drinkholder for hanging on sailboat lifelines. Approx. 10" long and 3" wide. Holds bottles or cans (does not hold insulated cover).

Sea Dog 588061 Flush Mount Combo Drink Holder White

The dual-purpose design allows the use of beverage cans with or without insulated can wraps.

Adjustable Cup Holders

Four colours with a sturdy and adjustable design can hold multiple cup styles, up to 44 fluid ounces.

Railblaza StarPort I Mount White or Black - 2 Pack

Railblaza StarPort is modelled on winch handle receivers on most sailboat winches.

Ongaro Drink Holder with Drain

Accommodates standard beverages, insulated beverage containers and water bottles.

Railblaza Cup Clam Drink Holder

Can be mounted in either horizontally or vertically mounted StarPorts

Railblaza SidePort Mount White

Sea Dog 588510 Single/Dual Drink Holder with Suction Cups

Expands from single to dual, mounts easily to most surfaces with suction cups.

Sea Dog 588520 Dual/Quad Drink Holder with Suction Cups White

Expands from dual to quad, and mounts easily to most surfaces with the suction cups.

Sea Dog 588011 Flush Mount Drink Holder White

Three inches deep and accommodates drink containers up to 2-7/8" in diameter with a 3" diameter hole for installation.

Sea Dog 327175 Rail Mount Rod Holder 316 Stainless

Formed and cast 316 stainless steel construction. Designed to fit 7/8” to 1” diameter tubing.

Rod Holder Stainless with PVC Cap

30° Flush mount polished stainless rod holder with a 1-5/8" inside diameter.

Snapit! M002 Double Drink Holder 1"

This versatile component holds 2 canned drinks with insulated sleeves, 2 mugs, water bottles or binoculars.

Snapit! M0016 Single Lifeline Drink Holder

Snapit standard drink holders are made of heavy durable white polyethylene and are sized to accommodate a canned drink with an insulating sleeve.

Snapit Drink Holder Racers Single for 1 in. Rail

A simple, sturdy, no frills, lightweight drink holder specifically designed for one drink. Fits 1" rail.

Snapit! M001 Single Drink Holder 1"

Installs with a snap. Snaps to your pedestal guard, stanchion or stern pulpit.

Snapit M004 Convertible Single or Double Drink Holder 1inch

Snapit standard drink holders are made of heavy durable white polyethylene. Holds one drink or you can swing out the nested holder to accommodate two drinks.

Snapit! M003 Pivoting Drink Holder 1"

A single pivoting drink holder designed for the angled 1" diameter tubing on your boat.

Snapit M006 4" Diameter Mounting Pad 1"

A practical general-purpose mounting pad. Snapit! to your 1" diameter pedestal guard.

Soft PVC Drink Holder

Designed to hold beverage cans, bottles, air horns, etc.

Railblaza 02-4131-11 ScreenGrabba R-LOCK iPad and Tablet Holder

Holds your iPad, Galaxy Tablet or other touchscreen firmly, even when it's in a waterproof bag or case.

Teak 2-Insulated Drink Rack

Larger openings hold two cans in insulated drink holders, cups or bottles.

Teak Two-Drink Rack

Holds two non-insulated cans or bottles. 7-1/2" Long x 3-1/2" high x 3-5/8" Deep.

Beckson Soft-Mate HH-8 Handheld Radio Holder

Soft PVC holder for hand held VHF radio, GPS and phones. Includes stainless steel mounting screws. White.

Rod Holder Stainless Steel Flush Mount 30 Degree

Approximate depth of 7-1/2" when fitted, and with a 4-1/2" by 3-1/2" base.