12 Volt Accessories

Balmar ARS-5 Voltage Regulator with Harness

Provides precise voltage control for Balmar high-output 12-Volt alternators and other externally regulated P-type (positive field) alternators.

Balmar MC-618-VL-01 Valeo Regulator Kit MC-618 12V

Balmar SG205 Smartgauge Battery Monitor with SmartShunt & Bluetooth® Gateway

All the features of a Smargauge SG200 on your device. Now you can determine your battery(s) condition from anywhere with the Bluetooth® Smartphone App to keep information in your pocket.

Marinco GFCI Receptacle White 1591-FI

Power Rating: 15-Amp, 125-Volt. Required by the ABYC for Receptacles Located Outdoors or Near Water. Color: Ivory

Scanstrut Flip Pro 12/24V Fast Charge Dual USB-A/C Socket SC-USB-F1

Designed for use with either a 12V or 24V input and features a USB-A and USB-C charging port. Charging up to 36W on a 12V system or up to 60W on a 24V system.

Scanstrut ROKK Catch Wireless Phone Charger

Catch safely holds & wirelessly charges your phone at the same time. Now you can keep your phone in a safe place on board, in sight, charged and ready to go!

Blue Sea 4366 Water-Resistant Accessory Panel 12V Socket, Dual USB Charger Mini OLED Voltmeter.

Designed to be mounted below, this 12V Accessory panel has a single Dual USB and 12V Charging Socket. In addition, it has a Mini OLED Voltmeter and the integrated circuit breaker can prevent a parasitic draw.

Blue Sea 4368 Water-Resistant Accessory Panel 12V Socket, 2 USB Chargers, Mini Voltmeter

Panel front is IP66 when mounted with the gasket in place - protected against powerful water jets. Includes a 15A circuit breaker switch and a pre-wired harness with dual USB and a 12V Charging Socket. Also, it has a Mini OLED Voltmeter and the integrated circuit breaker prevents a parasitic draw.

Balmar Max Charge MC-618-H Multi-Stage Voltage Regulator with Harness

Designed to provide precise voltage control for Balmar's high-output 12-volt alternators and other externally regulated P-type alternators, the MC-618 features eight user-selectable programs

Balmar SG200 Smartgauge Battery Monitor

The SG200 is designed to monitor a battery or battery bank, which is used in deep cycling applications. It relies on the battery being discharged and then charged to learn the battery’s characteristics. This learning process may never occur on a start-only battery since it is never cycled. However, The SG200 does have two additional leads to connect to starting batteries to read voltage only.

Scanstrut ROKK Waterproof Wireless Phone Charger - Bezel Install

Scanstrut ROKK, the worlds first waterproof wireless inductive charger.

Scanstrut ROKK Waterproof Wireless Phone Charger - Hidden Install

Sub-surface, hidden from view and charges through the surface. Pocket or bond install ideal for GRP or wood. IPX6 waterproof.

Scanstrut ROKK Waterproof Wireless Phone Charger - Surface Install

Low-profile, flush-mounted wireless charge pad with an ultra grippy, non-slip surface. Designed to fit to any smooth surface, indoors or out.

Balmar 44-SG-12/24 Smartgauge Battery Monitor

It provides highly accurate monitoring without the hassle of installing a shunt module to count amperes. The easy-to-understand display, dependable State-of-Charge Percent (SoC%) reading and ease-of-use mean that even the most technically challenged crew member can understand just how much power is left in the battery.

Blue Sea 1045 Dual USB Charger - Socket Mount 12/24V

An intelligent charging device that recognizes what it is being asked to charge.

Blue Sea 4363 BelowDeck 12V Charging Center

Designed to be mounted below, this 12V panel has dual USB and 12V Charging Sockets, with an integrated circuit breaker that can prevent a parasitic draw.

Blue Sea 1478 360 Panel 12V Dual USB Socket

The Socket and Dual USB Charger module integrates one 12V DC Socket and one Dual USB Charger.

Blue Sea 1016 Dual USB Charger 2 Socket 5V 2.1A

Conveniently charge popular USB-powered mobile devices. Easy to install in existing 12V DC socket hole.

Marinco 12VRC SeaLink Deluxe 12 Volt Receptacle Black

Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation

Marinco SeaLink 12V Plug 12VPG

A high quality 12 Volt plug.

Sea Dog 426053 Power Socket with Plate

All stainless 12V DC Power Socket is ideal for installing additional power outlets. Maximum 16 Amps.

Sea Dog 426113 Nylon Power Socket and Cap

Stamped brass and injection moulded nylon & ABS power socket and cap easily adds 12V power almost anywhere.

Sea Dog 426114 Plug for Sea Dog 12 Volt Nylon Socket

Plug for Sea Dog 426113 Nylon Power Socket. Constructed of injection moulded nylon.

Xantrex Digital Echo~Charge 82-0123-01

Charges auxiliary or starting batteries from an inverter/charger or other charging source with limited voltage drop.

Balmar 100A Yanmar Alternator Kit with Max-Charge Voltage Regulator

Save time, and money with a Balmar 60 Series 100A Alternator, and a premium Max Charge MC-614-H Multi-Stage Voltage Regulator. For use with Yanmar, Westerbeke, Lehman and Perkins-Sabre engines with 3.15" ID saddle style mounts. Kit includes Alternator and Battery Temperature sensors.

Sea Dog 426116 Deluxe Power Socket with Plug and Cap

The plug includes an LED light to indicate when powered. 12 Volt, 16 Amps. The plug includes a 3 Amp fuse.

Blue Sea 1011 12V DC Dash Socket

Features watertight cap, easy installation, and the plug locks securely in socket. Max 15A.

Scanstrut ROKK Charge+ Rapid Charge Waterproof USB Socket - 2 Socket

The ultimate rapid charge waterproof USB charger, the ROKK Charge+ is the only choice for IPX6 waterproof USB charging on-board.

Blue Sea 1039 Fast Charge 4.8A Dual USB Charger Switch Mount 12V

Intelligent device recognition allows rapid charging of phones, tablets, or other mobile devices. Fits Contura Panels.

Balmar SG2-0300 Smartphone Bluetooth Gateway

Optional Bluetooth Gateway for Smartphone App in conjunction with Balmar SG-200 Battery Monitor.

Blue Sea 1014 12 Volt Socket Mounting Bracket

For mounting the 12V Blue Sea Systems Power and Dual USB Sockets.

Balmar MC-TS-A Alternator Temperature Sensor

Used to provide alternator temperature sensing capability to a compatible Balmar Alternator Regulator.