Antenna and GPS Mounts

Antenna Mount - Nylon Ratchet

Antenna Mount For Rail Mounting - Stainless Steel

Fits standard 7/8" and 1" round rails. SS316. Low Profile. No ratchet

Antenna Rail Mount 7/8" and 1" Rail

Rail mount bracket for 7/8", and 1" diameter round rails. Fits industry standard 1"-14 thread antenna bases.

Antenna Ratchet Mount Stainless Steel

Glomex RA129/120 GPS Extension Mast 48in

48" Aluminum extension mast to raise an external GPS antenna.

Glomex RA129/30 GPS Extension Mast 12in

12" Aluminum extension mast to raise an external GPS antenna.

Glomex RA129/60 GPS Extension Mast 24in

24" Aluminum extension mast to raise an external GPS antenna.

Glomex RA134 Nylon Rail Swivel Mount

Reinforced nylon 1"-14 thread Antenna Mount for horizontal or vertical 7/8" and 1" diameter rail. Knob locking.

Glomex RA135 4-Way Nylon Ratchet Antenna Mount

Reinforced UV resistant nylon four way ratchet antenna mount with a knob for easy and fast instalaltion on deck or bulkhead.

Glomex RA145 Nylon Pulpit Railmount for GPS Antenna

For installation of GPS antennas on horizontal rails of 7/8" and 1" diameter.

Glomex V9172 TV Antenna Mount

Micro-fused, electro-polished and hand-polished stainless steel angled slip mount for Nashira TV antennas.

Nylon Antenna Base - Fixed - GPS Only

Nylon GPS antenna mount. Fixed. GPS only. 1 inch thread dia.

Ram Hand Held Quick Release Mount RAM-120U

The RAM-120U consists of a double socket arm, 2.5" diameter round base with the universal AMPS hole pattern and side clamping cradle that is designed to hold a large variety of electronic devices.

Ram Mount Handheld Mount with U-Bolt Rail Clamp RAM-120-231U

Designed for handheld items, such as a VHF or GPS.

RAM Mount Single Swing Arm Mount Vertical RAM-109VU

RAM Mount single swing arm mount consists of a 6" long bent swing arm mounted on a vertical surface mounting base.

RAM Universal Marine Electronic Mount RAM-111

Powder coated marine grade aluminum mount, consists of a double socket arm mount, one round 2-1/2" diameter base with 1-1/2" rubber ball and flat 6-1/4" x 2" rectangular plate.

Raymarine GPS/MicroTalk Clamshell Riser Mounting Kit A80437

Optional bulkhead or deck mounting for Raymarine RS150 GPS Antenna and the Raymarine Micro-Talk Wireless Performance Sailing Gateway. Replacement mounting bracket for Evolution EV1 Sensor Core E70096.

Scanstrut ROKK Mini Adjustable Body RLS-AM

Multi position adjustable body that mounts to a choice of bases and top plates to mount fishfinders and small chartplotters. Top plate and mounting base sold separately.

Scanstrut ROKK Mini Rail Mount RLS-402

Fits straight or curved rails from 3/4" (19 mm) to 1-1/4" (34 mm) in diameter. Three UV resistant black rubber inserts are included to ensure optimum fit.

Scanstrut ROKK Mini Screw Down Mount RLS-401

Leaves just a low profile base behind when your electronics are not in use.

Scanstrut ROKK Mini Self Adhesive Base RLS-404

No drill holes required.

Scanstrut ROKK Mini Suction Cup Mount RLS-405

High strength, outdoor ready suction cup base is engineered better for longer lasting grip. Fits to any rigid, clean, smooth, non-textured surface. Mounts quickly with over-centre locking arm. No tools required.

Scanstrut ROKK Mini Tablet Clamp RL-508

Fits devices from 5" to 8 1/2" in width, including iPad, iPad Pro, iPad Air, iPad Mini, Google Nexus and Samsung Galaxy Note.

Scanstrut ROKK Mini Universal Phone Clamp RL-509

Fully adjustable moulded grips provide superb device holding in all weather conditions. Fits devices from 1.7" to 3.3" in width.

Scanstrut ROKK Mount - Adjustable Deck Mount RL-ADM

Multi position mount for fishfinders and small chartplotters. Top plate sold separately.

ScanStrut ROKK Raymarine DragonFly 4/5/7 Pro Plate

Integrates directly into the back of the Dragonfly unit, no additional parts are required to make attachment.

ScanStrut ROKK Self Drill Universal Top Plate

Self drill Universal top plate to fit a wide range of displays.

Scanstrut ROKK Tablet Mount Kit with Screw Down Base

Designed to mount all tablets with a 7" to 12.9" screen size; Mini to Pro sizes. The hi-performance ROKK Tablet Mount Kit is part of the ROKK Modular Mounting System that enables secure attachment of electronics to boats, cars, off-road vehicles, aircraft and more.

Scanstrut ROKK Tablet Mount Kit with Suction Cup Mount

Suction Cup mounts all tablets with a 7" to 12.9" screen size; Mini to Pro sizes. The hi-performance ROKK Tablet Mount Kit is part of the ROKK Modular Mounting System that enables secure attachment of electronics to boats, cars, off-road vehicles, aircraft and more.

Scanstrut ROKK Tablet Mount with Rail Mount 508-402

Rail mounts all tablets with a 7" to 12.9" screen size; Mini to Pro sizes. The hi-performance ROKK Tablet Mount Kit is part of the ROKK Modular Mounting System that enables secure attachment of electronics to boats, cars, off-road vehicles, aircraft and more.

Scanstrut Scanpod Arm Mounted Pod for Single Instrument SPR-1i-AM

Scanpod pedestal arm mount for sailboat instruments. Fits rail 1" to 1.3" in diameter.

Scanstrut Scanpod Rail Mounted Pod for 7 in. Displays SPR-7-RM

Rail mounted Scanpod achieves a neat and streamlined look. Uncut 8.5" x 5.5" usable face for electronic screens up to 7", including B&G Zeus2 and Vulcan, Garmin 700 Series, Lowrance Elite 5 and 7, Simrad NSS-7 and Raymarine a7x models.

Scanstrut SPR-7-AM Scanpod Arm Mounted Pod for 7" Display

Stanchion mount pod for fishfinders and displays up to 7 inches. Solves the challenge of finding a mounting surface to install displays on your powerboat, RIB or sailboat. Fits rails 1" to 1.3" in diameter.

Scotty 163 Ball Mount for Fish Finders Up to 9 Inches

Heavy-duty 1-1/2" ball mount with 8" x 3" top plate allows you to position 7" to 9" fish finders at the perfect angle on your boat.

Scotty 173 Ball Mount for Large Fish Finders

Heavy-duty 2-1/4" ball mount with 11-1/2" x 3" top plate allows you to position your 10" - 12" fish finder at the perfect angle on your boat.

Sea Dog 329300 Adjustable Antenna Base 304 Stainless Steel

This Adjustable Antenna Base features dual swiveling mounts for full adjustability and a ratchet-style handle for side or deck mounting.