Radar Mounts

Scanstrut 5 Inch Aluminum PowerTower

Expertly designed to install 2 kW and 4 kW radomes, Open Array and small SatCom TV Antennas on the cabin roof, flybridge or radar arch of your powerboat. 130 mm (5”) tall and provides low-level clearance of smaller cabin top obstacles.

Scanstrut LMM-1 Self Levelling Radar Mast Mount

As the boat heels or rolls, the radar is kept horizontal preventing target loss and giving the best possible radar picture. Mast mounted for 2kW/4kW Raymarine, Garmin, and the Navico brands of BR24/3G and 4G radomes

Scanstrut SC102 Pole Mount

Complete pole system for 2kW & 4kW Raymarine; Garmin and Navico BR24, 3G & 4G radar domes. Stands 8' (2.5m) above the deck. A practical and aesthetic solution, and more cost effective than a custom steel pole.

Scanstrut 18 in. Fixed Mast Mount SC20

The original and first choice around the world, the Scanstrut SC20 is a cost-effective and space saving solution for installing radar or Satcom antennas. The new, larger mounting footprint is stronger, stiffer and now even easier to fit. Fits select models.

Scanstrut M92722 18" Mast Mount

Mast Mount for 18" & 24" Raymarine, Garmin and HALO24 radomes. Attaches with four swivel feet, matching a variety of mast profiles.

Scanstrut LMB-F1 Self-Leveling Radar Backstay Mount Forward Facing

Forward facing backstay mounted Scanstrut self-leveling radar mount positions your radar away from any interference, leaving a clear deck free from obstruction.

Seaview ADA-R1 Modular Top Plate For Closed Dome & Open Array Radars

Top Plates are used in conjunction with Seaview Radar Mounts, and secures the radome to the Radar Mount. Compatible with a wide array of manufacturers Domes and Open Array's.

Seaview PMA-57-M1 Modular Aft Rake Mount 5 in.

Five inch tall, aft facing modular mount; requires the addition of a Seaview Radar Modular Top Plate. Works with closed dome radars, open array radars, satdomes and cameras.

Seaview PMF-57-M1 Modular Forward Leaning Mounting Base 5in.

Forward leaning, 5" inch tall modular mount, requires the addition of an optional Radar Modular Top Plate. Works with closed dome radars, open array radars, satdomes and cameras.

Seaview RW4-2 Angled Wedge 4 Degree for Raymarine Navico Garmin

Improve radar performance when up and planing with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below horizontal

Seaview SM-18-R Mast Mount Raymarine and Garmin 18 in. Dome

For 18" Garmin & Raymarine Radomes & BR24 Broadband

Seaview SM-18-U Radar Mast Mount 15 - 18 in. Dome

For Furuno radar domes 15" to 18", and the Koden and Si-Tex 18". Easy and quick to install, all fastenings supplied. Attached to mast by four feet that swivel to match the profile of any mast.

Seaview SM-24-R Radar Mast Mount 24 in. for Garmin Raymarine

Seaview SM-24-U Radar Mast Mount

Fits select 24" Furuno, Geonav, Sitex MDS9 and Sitex Radar.

Seaview LTB-R Light Bar

For 18" - 24" closed dome radar mounts. This light bar can fold over 90°. Seaview light bars are made from aluminum and powder coated brilliant white and are compatible with Seaview Modular Mounts.

Seaview LTBP1197 Perko 1197 Anchor Light With 7' of Cable

Perko 1197 Anchor light and 7' of wire (12V) for mounting on the Seaview LTB-R Light Bar. Can be converted to 24V and is USCG/CCG approved for boats up to 20 meters (65'-6") in length.

Scanstrut LMP-1 Self Leveling Radar Pole Mount

Complete kit including base, pole, levelling cradle, 1200mm deck strut & 25mm rail stand off. Mounted on 8' Scanstrut SC100 Pole Mount - for 2kW & 4kW Raymarine, Garmin and Navico BR24, 3G & 4G radomes.

Scanstrut LMB-A1 Self-Levelling Backstay Radar Mount Aft Facing

Mounts aft of the backstay; and is for 2kW/4kW Raymarine, Garmin and Navico BR24, 3G & 4G radar.

Scanstrut Mast Mount Adapter Kit 50100

Mast adapter kit for Z-Spars, Eurospars, and Isomat masts with integral track on the front which makes it difficult to fit Scanstrut mast mount.

Scanstrut .6m Extension for LMB Mount LMB-EXTSHORT

A .6m extension kit for LMB Self-Levelling Radar Mounts, includes joiner and fastening kit.

Seaview SM-AD-ISO Isomat Mast Mount Adapter

Isomat mast platform adapter