Harken 150 Standard Cam-Matic Cleat Anodized Aluminum

Max line diameter 1/2" (12mm). Max working load 300lb (136kg). Pawl material - aluminium.

Harken 468 Micro Cam-Matic Cleat Aluminum

Aluminum pawls with a maximum working load of 200 lb. The maximum line diameter is 1/4".

Harken 471 Micro Carbo-Cam Cleat

Maximum working load of 150 lb. and a maximum line size of 6mm. Lightweight fibre-reinforced for racing where weight is critical, or where adjustments are less frequent.

Harken 150SP Cam-Cleat for Windward Sheeting Car

Modified 150 Cam-Matic cleat with two stainless steel posts for use with Windward Sheeting car.

Harken 280 Offshore Cam-Matic Cleat

The 280 Offshore Cam-Matic Cleat is for lines up to 5/8" in diameter. It has a maximum working load of 500 lbs, anodized aluminum pawls.

Harken 150 Cam Cleat Rebuild Kit

Rebuild Kit for Cam-Matic® Cam Cleat and includes cam replacement springs, ball bearings, base plate, top caps, and instructions.

Harken 496 Fast Release Fairlead with Cam-Matic Cleat

Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat.

Harken 238 Cam-Matic Cleat On Plate & Bullseye

150 Cam-Matic® with bullseye keeps line fair. Mounts on stainless steel base.

Harken 239 Carbo-Cam Cleat On Plate & Bullseye

365 Carbo-Cam® with bullseye keeps line fair. Mounts on stainless steel base.

Harken 395 29mm Pivoting Lead Block with 468 Cam-Matic Cleat

A pivoting lead block with a Micro 468 Cam-Matic cleat is used for halyard controls on larger keelboats and as "head knockers" on dinghies for sheeting directly from the boom.

Harken 494 Standard Fast Release Fairlead

Use for fast spinnaker take-downs during mark roundings—anywhere fast release is crucial.

Harken 396 29mm Pivoting Lead Block with 471 Carbo-Cam Cleat

The lighter Safe Working load of the two 29mm Pivoting lead blocks. It has a 471 Carbo Cam-Matic cleat with a 150-pound Safe Working load.

Harken 495 Micro Fast Release Fairlead

Angled lead keeps the line away from the Cam to eliminate unexpected re-cleats during maneuvers. Use for fast spinnaker take-downs during mark roundings or anywhere fast release is crucial.

Harken Angled 15 Degree Cam-Matic Riser

Harken 294 Angled 15 Degree Micro Cam-Matic Riser

Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting.

Harken 438 Cam Cleat Mast Adapter Plate

Perfect for use on masts and booms. It raises the cleat off the mast to improve the cleating angle and control.

Harken Flat Cam-Matic Riser

Harken Standard Cam-Matic Wedge Kit

Fits 150 and 365. Fastener spacing1 1/2" (38mm).

Harken Micro Cam-Matic Wedge Kit

Fits 423. Fastener spacing 1 1/16 (27mm)

Harken Offshore Cam-Matic Wedge Kit

Fits Harken Offshore Cam-Matic 280 cam cleat and may improve the angle of your cams.

Harken 2156 40mm Pivoting Lead Block with 150 Cam Cleat

A pivoting lead block with the stronger 150 Cam-Matic cleat is used for halyard controls on larger keelboats and as "head knockers" on dinghies for sheeting directly from the boom.

Harken 298 Wire Fairlead for 150/365 Cam Cleat

Harken 205 Little Swivel Base with Cam-Matic

The low profile 205 is used when installation is at deck level and when smaller blocks are used.

Harken 144 Mainsheet Swivel Base

The 144 is the standard configuration with a tall arm. It is ideal for mounting in the cockpit or for use on larger keelboats and small offshore boats that use 3.00 in (76 mm) plastic blocks.

Harken Bullseye with Swivel Base & 200 Cam-Matic

Harken 375 Standard X-Treme Angle Fairlead for 150/365 Cam Cleats

Used with Standard size Cam-Matic Cleats and allows releasing and recleating at angles up to 90° to the cleat.

Harken 365 Carbo-Cam Cleat -3/8 Max Rope

Max line diameter 3/8" (10mm). Max working load 200lb (91kg). The pawls are constructed from a plastic carbon-matrix for weight savings.

Harken 7359 Reflex Stanchion Mount Double Cam Fairlead

Harken stanchion mount fairlead with double cam cleats for asymmetric/code zero furling systems allows for safe furling from the cockpit.

Harken 476 Micro X-Treme Angle Fairlead for 468/471 Cam Cleats

Angle Fairlead. Fits cam 468, 471