Boat Rail Fittings

Sea Dog 293131 Four Way Corner Fitting for 1" Rail

For use with 1" O.D. Stainless steel Tubing

C.S. Johnson 29-501 Pulpit Anchor - 1" Rail

Can be used on the stern rail and bow pulpit to terminate lifeline Jaw fittings.

Grab Rail Post for 1" Rail

Elevates a 1" diameter grab rail approximately 1" above the deck.

Heavy Duty Top Cap 316 Stainless for 1" Tube

Features a raised and deeper set screw socket with more threads. For 1" tubing and has a 5/16" diameter eye.

Deck Hinge 316 Stainless Steel 90 Degree

Attaches to a flat surface like the cockpit coaming strip and serves as an attachment point for a bimini or dodger frame.

Stainless Boat Top Bimini Deck Hinge Angled

Boat top hinge with an approximate 10° angle. 3/16" bolt.

Grab Rail Center Fitting 60 Degree for 1" Rail

Stainless Steel rail fitting for 1" rail.

Rail Fitting 30 Degree Rectangular Base 1 in.

Rail Fitting 30 Degree Round Base 1 in.

Rail Fitting 45 Degree Rectangular Base 1 in.

Rail Fitting 45 Degree Round Base 1 in.

Rail Fitting 60 Degree Rectangular Base 1 in.

Rail Fitting 60 Degree Round Base 1 in.

Rail Fitting 90 Degree Round Base 1 in.

Rail Fitting 60 Degree Tee Universal 1 in.

Rail Fitting 90 Degree Rectangular Base 1 in.

Set Screw M6 x 6 Stainless A2

Metric 6 mm set screws for rail fittings. Fits most Victory rail fittings.

Rail Fitting 90 Degree Tee Universal 1 in.

Rail Fitting 90 Degree Elbow 1 in.

Rail Fitting Top Slide Hinged Jaw fits 1 in. Rail

Opens to wrap around existing tubing; then is screwed shut. A Jaw is then ready to accept a Top Cap.

Rail Fitting Top Slide Hinged Jaw 1-1/4 in. Rail

Opens to wrap around existing tubing; then is screwed shut. A Jaw is then ready to accept a Top Cap.

Rail Fitting Hinged Jaw Slide 1-1/2 in. Rail

Opens to wrap around existing 1-1/2 inch diameter tubing; then is screwed shut. The Jaw is then ready to accept a Top Cap.

Sea Dog 327112 Rail Mount Fairlead with Stainless Insert

Allows easy routing of roller furling lines.

Grab Rail End Fitting 60 Degree for 1" Rail

Finishes the end of a 1" diameter Grab Rail.

Rail Connector Stand-Off for 1 in Rail

Stainless steel stand-off rail connector for 1" diameter stainless tube.

Rail Fitting Stanchion Cap for 1 in. Rail

316 Stainless steel stanchion cap with a 5/16" pass-through hole. Secured with a 6mm diameter set screw.

Rail Fitting Top Cap Fork End 1 in. Tube

5/16" (8mm) space between the forks with a 3/8" (10mm) eye hole diameter.

Sea Dog Stanchion Eye 1 in.

Fits externally over 1" diameter tube.

Stanchion 24 in.Tall x 1 in. Stainless Steel

Tapered 1" OD by 24" high stanchion.

Universal Swivel Boat Top Bimini Deck Hinge

A pivoting hinge to compensate for the many different angles of decks and coamings. Fits tubing with an Eye fitting with an eye up to 3/16" thick.

Stanchion Base Cast Stainless Steel for 1in tubing

Cast stainless steel stanchion base with 1 inch inside diameter. Base is 3-3/4 x 2-3/4 inch.

Set Screw 8-32 x 1/4 In. Stainless

#8 Coarse thread (32 TPI) by 1/4" in length.

Set Screw 10-32 x 1/4 In. Stainless

#10 Fine thread (32 TPI) by 1/4" in length.

Rail Fitting End Plug with Eye for 1 in. Rail

Set Screw 1/4-20 x 3/16 In. Stainless

1/4" Coarse thread (20 TPI) by 3/16" in length.

Sea Dog 270500 Stanchion Eye Insert 1"

Fits internally in 1" diameter stanchion tubing with a wall thickness of 0.049".