Sea Dog 060210 Straight Chock 6” Investment Cast 316 Stainless Steel

Straight Chocks are typically mounted at the stern or midships to feed a line up to 1” in diameter to horn style cleats. 316 Cast Stainless Steel.

Sea Dog 081261 Stainless Tie Down Eye Strap

Used with 1” wide webbing to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc. This forged stainless tie down eye strap can be used for a multitude of applications.

Sea Dog 081262 Stainless Tie Down Eye Strap

Used with webbing up to 2” wide to hold down batteries, fuel tanks, ice chests, life rafts, dinghies, etc. This forged stainless tie-down eye strap can be used for a multitude of applications.

Sea Dog 201025 Offset Short Hinge 304 Stainless Steel Pair

Great for interior and exterior applications such as cabinets, hatches, folding tables, or seats where mounting space is tight. Five pre-drilled holes.

Sea Dog 201072 Butt Hinges 2" x 2" Stamped 304 Stainless

These are an economic stamped 304 Stainless steel set of butt hinges.

Sea Dog 201080 Butt Hinges 2" x 3" Stamped 304 Stainless

Pair of corrosion-resistant stamped 304 Stainless steel butt hinges.

Sea Dog 201555 Round Side Two Pin Hinge 304 Stainless 3" x 1-1/2" Pair

Two Pin Hinges open 180°, making them ideal for folding tables or doors that must fold back flat. Good for use in tight spaces.

Sea Dog 201590 Offset Butt Hinge

To be mounted on the front surface of a raised door with a 3/8" offset on one side.

Sea Dog 201710 Round Side Door Hinge Medium Pair

Ideal for cabinet doors. Constructed of corrosion-resistant stamped 304 stainless steel.

Sea Dog 201914 Semi-Concealed Hinge Stamped 304 Stainless Pair

Semi-Concealed Hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door.

Sea Dog 204278 Left Take-Apart Hinges Forged Brass Chrome Plated Pair

Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners. The pin is on the left side allowing a door or lid on the right to be removed.

Sea Dog 204279 Right Take-Apart Hinges Forged Brass Chrome Plated Pair

Forged brass, chrome-plated take apart hinge. 3-7/8 x 2.

Sea Dog 204280 Hatch Hinge Forged Brass Each

Chrome plated forged brass version.

Sea Dog 204391 Brass Strap Hinge 4" x 1-1/6" Pair

Cast polished brass.

Sea Dog 205140 Butt Hinges 1-5/8" x 1-1/2"

Investment cast 316 stainless steel.

Sea Dog 205280 Hatch Hinge Investment Cast 316 Stainless Each

Investment cast 316 Stainless steel.

Sea Dog 205285 Long Reach Hatch Hinge Cast 316 Stainless Each

Particularly well suited for wider doors or hatches where a greater spread is required on the hinges.

Sea Dog 205390 Strap Hinge 4-1/8" Stainless Steel Pair

Strap hinges consist of two long, narrow leaves of equal length extending from a single knuckle. Commonly used for gates, dock box lids, fish holds, etc.

Sea Dog 205420 Investment Cast Door Hinge Pair

2-1/16" x 2-1/16" Wide with six #10 fastener holes.

Sea Dog 206530 Door Hinge 2-7/8" Zinc Chrome Plated Pair

Sea Dog 221120 Safety Hasp Stainless 2-11/16" x 1"

Stamped 304 stainless steel hasp 2-11/16" long by 1-1/6" wide.

Sea Dog 221320 Table Brackets 304 Stainless Pair

One 4-piece set includes two wall and two table brackets.

Sea Dog 221810 Spring Loaded Flush Ring Pull 2-9/16" x 2-3/16".

Stamped 304 Stainless Steel Pull Ring is spring-loaded to prevent rattling and says flush against the base, even in vertical applications.

Sea Dog 221815 Spring Loaded Flush Ring Pull 1-3/4" x 1-1/2"

Spring loaded flush Ring Pull, 304 Stainless steel electro polished.

Sea Dog 221820 Spring Loaded Flush Hatch Pull

The spring loaded handle prevents rattling and stays flush inside the base.

Sea Dog 221831 Surface Mount Locking Ring Pull

Recessed for a flush, clean installation. Includes two locking arms for flush or offset installations. Ideal for hatches, deck plates, cabinets, and drawers.

Sea Dog 221930 Cam Lock

Die-cast zinc with stamped 304 stainless steel nut. Includes two locking arms for flush or offset installations.

Sea Dog 222004 Solid Brass Body Padlock

Solid brass body 1/4" diameter hasp.

Sea Dog 222120 Safety Hasp Chrome Brass 3" x 1"

3" long by 1" wide. Constructed of sand cast brass with a chrome-plated finish.

Sea Dog 222130 Swivel Hasp Chrome Plated Brass

3" long and constructed of sand cast brass with a chrome-plated finish.

Sea Dog 222410 Flush Chrome Plated Brass Pull Ring

Outside dimensions are 2-1/2" x 2".

Sea Dog 225420 Rectangular Push Button Cabinet Latch

Functions as both a latch and handle. Sleek, low-profile design makes them convenient in tight spaces. Installs by boring a single 3/4" hole.

Sea Dog 299981 Release Pin & Lanyard 1/4"

1/4" x 15/16" Quick Release Pin with a 6" lanyard.

Sea Dog 312933 Anchor Chain 3/16" X 36" PVC Coated

White PVC coating provides corrosion resistance and boat surface protection.

Sea Dog 312944 Anchor Chain 1/4" x 48" PVC Coated

Features welded over-sized end links for easy shackle attachment.

Sea Dog 312955 Anchor Chain 5/16" X 60" PVC Coated

Constructed of 5/16" forged hot-dipped galvanized steel with white vinyl PVC coating.