This Sale ends in 1 DAY : 2 HRS : 51 MINS or when item is sold out.

System Three S1 Clear Penetrating Epoxy SealerOn Sale

View all products in Epoxy Accessories
Binnacle.com #:  13135
Be the first to review this product
System Three S1 Clear Penetrating Epoxy Sealer
Click to enlarge

Free Shipping This Item qualifies for Free Shipping on orders over $99! More Info...

S-1 is a two-part Clear Penetrating Epoxy Sealer. Mixed at a simple 1:1 ratio S-1 is extremely effective at prolonging the service life of all woods, concrete, metals, and fiberglass.
More Details...

Binnacle.com:   #13135
Some items are on sale 
CAD$138.95  -  CAD$399.95
    Choose your options:
   
Quantity:     
Add to Compare
System Three Resins

View all System Three Resins Products
View all Products in Epoxy Accessories

Why Choose S-1 Clear Penetrating Epoxy Sealer?

System Three S-1 is a 50% solids epoxy/polyamide system that penetrates porous substrates to deliver lasting waterproof protection. Unlike thicker coating epoxies, S-1's low viscosity allows it to wick deep into wood grain, concrete pores, and fibreglass laminates, sealing effectively against moisture and oxygen. The result is a durable barrier that helps prevent wood rot, oxidation on metals, and moisture intrusion in fibreglass reinforced polyester.

For Canadian boaters, this means reliable protection against the relentless moisture exposure that comes with our marine environment—from salt spray on the Atlantic coast to freshwater immersion on the Great Lakes.

Marine Applications

S-1 is purpose-built for the demands of the marine environment. Its completely waterproof cure makes it suitable for use above or below the waterline, and its resistance to salt air, mild acids, alkalis, chemicals, and solvents means it holds up in harsh conditions.

  • Seal bare wood on yacht interiors, decks, trim, and structural members to prevent rot
  • Use as the first sealer step in gelcoat blister repair after blisters have been ground out
  • Coat fibreglass polyester laminates to provide complete moisture resistance
  • Protect metal fittings and hardware against oxidation, staining, and tarnish
  • Prime surfaces before applying topside paint, varnish, or other clear finishes

Easy Mixing and Application

S-1 mixes at a straightforward 1:1 ratio by volume, eliminating the guesswork associated with more complex epoxy systems. Once mixed, the product is ready to use at its working viscosity—no thinning is required. The long pot life gives you ample working time, and application can be done with a brush, roller, or spray equipment.

For best results, apply S-1 between 10°C and 35°C (50–95°F). The sealer is tack-free in 4–6 hours at 25°C and reaches a dry-hard cure in 24–48 hours. If you recoat within 24 hours, no sanding is required between coats, saving considerable time on multi-coat projects.

Surface Preparation and Recoating

Proper surface preparation ensures maximum adhesion and penetration. Surfaces should be free of dust, grease, oil, wax, and any other foreign matter. Sand with 100–150 grit sandpaper and use a tack rag to completely remove dust before applying S-1.

  • New bare wood: Apply a minimum of three coats for full protection; recoat when surface shows signs of wear
  • Old varnished surfaces in good condition: Sand and apply S-1 as a primer before re-varnishing
  • Old finishes in poor condition: Remove entirely and treat as new work
  • Over cured epoxy resin: Sand with 220 or 320 grit to remove gloss; note that the resin surface may require up to 2 weeks of curing before coating
  • Clean up with epoxy reducer or lacquer thinner

Canadian Winter and Storage Considerations

S-1 remains non-brittle even at extremely low temperatures, making it well suited for boats that endure Canadian winters in storage or on the hard. The cured film will not crack or delaminate through freeze-thaw cycles, providing year-round protection for hulls, decks, and structural woodwork.

Store unmixed S-1 components in a well-ventilated area above freezing temperatures with containers tightly sealed. The product is classified as a flammable liquid (Class 3, UN1263) and can be shipped by ground only.

Colouring and Customisation

While S-1 cures clear, you can add System Three Paste Pigments up to 10% of the Part A Resin volume to create a coloured version of the sealer. This is useful for colour-coding sealed areas during repair work or for achieving a tinted primer coat beneath topside finishes.

Available Kit Sizes

S-1 is available in two kit sizes to suit projects of different scales:

  • 2 Quart Kit (SKU #13135) — CAD $144.95
  • 2 Gallon Kit (SKU #27107) — CAD $399.95

Specifications

  • Mix Ratio: 1:1 by volume
  • Solids Content: 50% by volume
  • Viscosity (Mixed): 100 cps
  • Viscosity (Part A, unmixed): 600–750 cps @ 25°C
  • Viscosity (Part B, unmixed): 600–750 cps @ 25°C
  • Density: 7.9 pounds/gallon
  • Specific Gravity (Part A): 0.968
  • Specific Gravity (Part B): 0.877
  • VOC Content: 562 g/L (4.91 lb/gal)
  • Coverage: 300–350 sq ft per gallon
  • Tack-Free Time: 4–6 hours @ 25°C
  • Recoat Without Sanding: Up to 24 hours
  • Dry Hard Time: 24–48 hours @ 25°C
  • Application Temperature Range: 50–95°F (10–35°C)
  • Appearance (Mixed): Clear
  • Flash Point: 60°F (15.6°C)
  • Transport Classification: UN1263, Class 3, Packing Group II
  • WHMIS Classification (Canada): Class B-2 (Flammable liquid), Class D-2B (Toxic)
  • Application Methods: Brush, roller, or spray
  • Clean Up Solvent: Epoxy reducer or lacquer thinner
  • Available Sizes: 2 Quart Kit, 2 Gallon Kit

Key Features 

  • Simple 1:1 mix ratio — eliminates measuring errors and speeds up preparation
  • Ready-to-use viscosity with no thinning required — saves time and reduces solvent waste
  • Completely waterproof cure — protects substrates above and below the waterline
  • Deep penetration into porous materials — seals wood, concrete, and fibreglass from within
  • No sanding between coats within 24 hours — dramatically reduces labour on multi-coat applications
  • Non-brittle at extremely low temperatures — withstands Canadian freeze-thaw cycles without cracking
  • Strong adhesion with minimal surface preparation — bonds reliably to wood, metal, fibreglass, and concrete
  • Resistant to salt air, mild acids, alkalis, and solvents — built for harsh marine environments
  • Long pot life — provides extended working time for large or complex projects
  • Serves as an undercoat primer — excellent base for paints, varnishes, and clear finishes
  • Can be tinted with paste pigments — allows colour customisation for primers or identification coats

 


  S-1 Sealer Part A Resin Safety Data Sheet

  S-1 Sealer Part B Hardener Safety Data Sheet

  S-1 Technical Data Sheet

Binnacle.com Shipping FAQ

Q. Do you offer Free Shipping?
A. We have free ground shipping via UPS or Canada Post within Canada on most orders of $99 or more (pre-tax).

Q. What do you mean by most orders?
A. Some items are exempt from this offer and are indicated on the product page. Exempt items include some paint products, bulky, heavy or long items. Some examples of Exempt items: Bottompaint, Anchors, Fenders, Buoys, Antennas. Over 98% of the items on Binnacle.com qualify for the free shipping offer.
To see what your shipping charge (if any) will be you can add the item(s) and quantities to the shopping cart and you will see a shipping cost calculator

Q. Where do you ship from?
A. We ship from Halifax, NS

Q. What is the delivery time?
A.  NS, NB, PE: 1 - 2 business days,
      ON, QC, NL: 2- 4 business days
      MB, SK, AB: 4-5 business days
      BC: 5-7 business days
When your order ships you will be emailed a tracking number which will give you the scheduled delivery date

Q. Do you offer Express Shipping?
A. We offer Express Shipping on some orders depending on the items ordered and the delivery address. If Express shipping is available for your order you will see the option on the checkout page. If you do not see the Express option and you want Express shipping please send an email and we will provide you with a quote (info@binnacle.com)

Q. Do you require a signature on delivery?
A. We sometimes add a signature requirement especially if it is a high value package

Please Note:
Very Remote areas are exempt from Free Shipping offer. These are typically remote northern areas. Nunavut as well as many parts of the Yukon and NWT are exempt from free shipping

Money Back Guarantee
Guarantee You may return your purchase to us (with a return authorization number - use this form) within 30 days and we will refund the purchase price of the product. Items which are cut to order (rope, wire etc), software, chart cards and printed materials (paper charts, books) are not returnable.

Related Products

View More
Displaying 1 to 10 (of 10 products)  1      
 
Evercoat Sea-Glass Fiberglass Cloth 6 oz. 38 In. x 1 Yard
Binnacle.com #: 27272 

Reg. Price: CAD$49.95
Sale: CAD$43.45

 
Evercoat Sea-Glass Fiberglass Mat 1.5 Oz.
Binnacle.com #: 27270 
Our Price: $59.95 
 
QuikAluminum Aluminum-Reinforced Epoxy Putty Stick
Binnacle.com #: 28173 
Our Price: $15.95 
 
3M Bondo Spreaders
Binnacle.com #: 27004 

Our Price: CAD$12.95 
 
System Three Cold Cure Cold Weather Epoxy
Binnacle.com #: 27018 
From: $69.95   to  $159.95 
 
Disposable CHIP Resin Brushes
Binnacle.com #: 27000 
From: $2.00   to  $3.95 
 
Starbrite Epoxy Aluminum Putty Stick 4 oz.
Binnacle.com #: 21048 

Our Price: CAD$39.95 
 
Starbrite Epoxy Putty Stick 4 oz.
Binnacle.com #: 21047 

Our Price: CAD$39.95 
 
The Fooler Disposable Brushes by Redtree
Binnacle.com #: 27079 
From: $3.95   to  $6.95 
 
One Quart Mix'n Measure Graduated Container
Binnacle.com #: 27007 

Our Price: CAD$1.95 

Customers who bought System Three S1 Clear Penetrating Epoxy Sealer also purchased


Browse for more products in the same category as the System Three S1 Clear Penetrating Epoxy Sealer
Home » Maintenance » Epoxy Accessories
 
0 items

Compare Product  

Facebook Twitter YouTube Sign Up for Email