A Cold Weather Epoxy Built for Year-Round Use
Most epoxy systems require warm, dry conditions to cure properly, which limits their usefulness during the shoulder seasons that Canadian boaters know well. System Three Cold Cure was specifically formulated to address this constraint, remaining effective at application temperatures as low as 2°C (35°F) and in conditions of 100% relative humidity. This means you can continue working on your boat, dock, or marine structure well into autumn and resume earlier in spring, without waiting for ideal weather.
Cold Cure is relied upon by boat builders, contractors, engineers, manufacturers, homeowners, and artisans as an all-purpose epoxy resin system. Whether you are sheathing a hull with fibreglass cloth, bonding structural components, sealing a concrete surface, or filling gaps with a thickened mixture, Cold Cure is formulated to handle the task.
Key Properties and Performance Characteristics
Cold Cure is a 100% solids, unfilled, medium modulus, low viscosity epoxy system. Its thin liquid consistency makes it easy to wet out fibreglass cloth, penetrate wood grain, and flow into tight joints. Because it contains no solvents, there are no VOCs and the odour is low, which is a practical advantage when working in enclosed spaces such as a cabin or workshop.
Once cured, Cold Cure delivers strong mechanical performance. It will not blush or turn milky in thin films, even in humid conditions, and it cures overnight at room temperature. The cured material can be machined, drilled, sanded, and tapped, giving you full flexibility for post-cure finishing and fastening.
- Non-shrinking and flexible after cure
- Excellent resistance to cracking, abrasion, common chemicals, and fatigue
- Clear finish compatible with most paints and clear topcoats
- No blushing or milky appearance in thin films
- Overnight cure at standard temperatures
Mixing and Application
Cold Cure uses a straightforward 2:1 mix ratio by volume, making it easy to measure and mix without specialised equipment. Each kit is pre-portioned: the 12 oz kit contains 8 oz of resin and 4 oz of hardener, the 24 oz kit contains 16 oz of resin and 8 oz of hardener, and the 48 oz kit contains 32 oz of resin and 16 oz of hardener. The working time at 25°C is approximately 45 minutes, providing adequate open time for most laminating and bonding tasks.
Cold Cure can be applied underwater, which makes it useful for emergency repairs and below-waterline work. When mixed with thickening agents and fillers, it becomes an excellent gap-filling putty for fairing, bedding, and structural bonding applications. The application temperature range spans from 2°C to 40°C (35°F to 102°F), covering virtually all realistic outdoor working conditions.
Where to Use Cold Cure Epoxy
Cold Cure is a versatile system suited to a broad range of marine and construction applications. Its moisture tolerance and cold weather capability make it particularly well suited to outdoor projects where conditions cannot always be controlled.
- Structural adhesive: bonding wood to wood, wood to fibreglass, wood to concrete, steel to concrete, and concrete to concrete
- Laminating resin: sheathing plywood with fibreglass cloth for boat hulls and decks, cold moulding with veneer, and making fibreglass composites
- Corrosion-resistant coating: protecting steel and concrete surfaces
- Sealer: concrete floors and foundations, fibre-reinforced polyester boat hulls, pressure-treated lumber
- Gap-filling putty: when combined with thickening agents and fillers for fairing and bedding
- Underwater repairs: can be applied directly to submerged surfaces
Cured Mechanical Properties
Cold Cure delivers reliable structural performance once fully cured. With a tensile strength of 6,000 psi, a compressive strength of 12,000 psi at yield, and an elongation of 11%, it strikes a balance between rigidity and flexibility that helps resist cracking under load and vibration. The Shore D hardness of 82 indicates a firm, durable surface suitable for mechanical finishing. The service temperature range of -20°C to -72°C (-4°F to 162°F) means cured assemblies remain stable across the full range of temperatures encountered in Canadian marine environments.
Safety and Handling
As with all two-part epoxy systems, proper personal protective equipment should be worn when handling Cold Cure. Always wear impervious gloves (neoprene, vinyl, or rubber), eye protection, and body-covering clothing to avoid skin and eye contact. Work in a well-ventilated area to minimise vapour exposure. Avoid mixing large masses of resin and hardener together in an uncontrolled manner, as the exothermic reaction can generate heat.
Store Cold Cure above 0°C (32°F) in a stable temperature environment with containers securely closed. Keep out of reach of children and pets. Dispose of unused product and containers in accordance with local, provincial, and federal regulations. Full safety data sheets for both Part A (Resin) and Part B (Hardener) are available for download from the product page.
Specifications
- Mix Ratio by Volume (Resin/Hardener): 2:1 (100:50)
- Mix Ratio by Weight (Resin/Hardener): 100:43
- Total Solids: 100%
- Mixed Viscosity: 800-900 cps
- Working Time at 25°C: 45 minutes
- Tack-Free Time at 25°C: 24 hours
- Application Temperature Range: 2°C to 40°C (35°F to 102°F)
- Service Temperature Range: -20°C to 72°C (-4°F to 162°F)
- Tensile Strength: 6,000 psi
- Tensile Elongation at Break: 11%
- Flexural Strength: 12,000 psi
- Compressive Strength at Yield: 12,000 psi
- Compressive Strength at Failure: 26,000 psi
- Hardness (Shore D): 82
- Heat Deflection Temperature: 127°F
- Coverage as a Coating: 20 sq ft/L
- VOC Content: None
- Resin Colour: Clear
- Resin Viscosity at 25°C: 1,100-1,200 cps
- Resin Density: 9.63 lb/gal
- Hardener Colour: Amber
- Hardener Viscosity at 25°C: 500-600 cps
- Hardener Density: 8.59 lb/gal
- Resin Flash Point: >300°F (Pensky-Martens Closed Cup)
- Hardener Flash Point: 230°F (110°C)
- 12 oz Kit Contents: 8 oz Resin (Part A) and 4 oz Hardener (Part B)
- 24 oz Kit Contents: 16 oz Resin (Part A) and 8 oz Hardener (Part B)
- 48 oz Kit Contents: 32 oz Resin (Part A) and 16 oz Hardener (Part B)
Key Features
- Cold weather performance: remains effective down to 2°C (35°F) in 100% relative humidity, extending your working season well beyond typical epoxy limits
- Moisture tolerant formulation: can be applied in high-humidity conditions and even underwater, enabling repairs that other epoxies cannot handle
- No VOCs and low odour: safer to use in enclosed spaces such as boat cabins, workshops, and below-deck areas
- Overnight cure: reaches a tack-free state within 24 hours at room temperature, keeping projects moving without long delays
- No blushing in thin films: cures clear without the milky or waxy surface contamination common with other epoxies in humid conditions
- Machinable after cure: can be drilled, sanded, tapped, and machined, allowing full post-cure finishing and hardware installation
- Excellent gap-filling capability: when combined with thickening agents and fillers, forms a strong, workable putty for fairing and structural bonding
- Broad application range: suitable as a structural adhesive, laminating resin, corrosion-resistant coating, and surface sealer across wood, fibreglass, steel, and concrete
- Compatible with most paints and clear finishes: clear cured colour allows direct topcoating without additional preparation steps
- Flexible and fatigue-resistant cure: resists cracking, abrasion, and common chemicals, providing durable performance in demanding marine environments
- Simple 2:1 mix ratio: easy to measure and mix accurately without specialised dispensing equipment
- Available in three kit sizes: choose from 12 oz, 24 oz, or 48 oz to match the scale of your project
Cold Cure Epoxy Tech Data Sheet
Cold Cure SDS Resin Part A
Cold Cure SDS Hardener Part B |