CS Johnson Backstay Diamond Plates

An integral part of a split backstay adjuster system.

SJ 14-206 Quick Release Lever

Speeds up stepping and unstepping the mast for trailered boats up to 26'.

C. S. Johnson Hand Crimp Tubular Turnbuckle 3/16 Lifeline Wire Cable

Hand Crimped Tubular Turnbuckle for 3/16" wire designed for easy installation by the boat owner. A properly installed hand crimp fitting will hold 65-70% of the breaking strength of 7x7 cable.

C.S. Johnson 29-501 Pulpit Anchor - 1" Rail

Can be used on the stern rail and bow pulpit to terminate lifeline Jaw fittings.

CS Johnson Adapter Link Plates - Assorted Pin Diameters

Allows conversion of an Eye to a Jaw, and a Jaw to an Eye. They must be used in pairs.

Sherman Johnson Shroud Adjuster Calibrated with 1/4 in Pin - Zim 420

Used as OEM equipment on Zim C420's, the calibrated adjuster will accept the Zim 1/4" Spinnaker Guy Roll Pin.

C. S. Johnson Splice Line Fitting - Over Center Gate Hook with Splice Eye

Create gates in Spectra lifelines with Johnson's Over Center Gate Hook and 12-Strand Splice Eye.

C.S. Johnson Eye to Jaw Fitting 1/4" Pin - LS-2500

This fitting will convert a small bail at the stern rail to a standard gate eye.

C Sherman Johnson Cast Gate Hook 5/16-24 LH Body Only 21-80

Replacement cast gate hook body with Left Hand 5/16"-24 thread. Left hand thread is the more common.

CS Johnson Open Body Turnbuckles - Jaw and Jaw

The forged silicon bronze body, coupled with "T" toggle jaws, provides positive locking and ease of adjustment.

CS Johnson Stay Extenders Link Plates

Designed for extending stays that are short, or to replace a turnbuckle. Three sizes which include the clevis pins.

Johnson Marine Circular Split Ring

Choose from X-Large for 1/2" & 5/8" Pins, R-3 Large for 1/4" & 3/8" Pins, R-2-1 Medium for 3/16" & 1/4" Pins, or the Small R-1 for 3/16" Pins.

C Sherman Johnson Cast Gate Hook 5/16"-24 RH Body Only 21-80-1

Replacement cast gate hook body with Right Hand 5/16"-24 thread.

C. S. Johnson Splice Line Fitting - Tubular Turnbuckle with Splice Eye

Create Spectra lifelines with Johnson's most popular size lifeline turnbuckle and a 12-Strand Splice Eye.

Medium Split Ring - Pigtail R-2

5/8" Diameter with Pigtail. Recommended for 3/16" and 1/4" Turnbuckles.

C Sherman Johnson Cast Gate Hook Repair Kit 21-850

Replacement pin and spring fits most Cast Gate Hooks.

C. S. Johnson Splice Line Fitting - Toggle Jaw with Splice Eye

Use Hi-Tech 12-Strand to replace your wire lifelines. Toggle Jaw with Splice Eye allows 1/4" Dyneema or Spectra line to be attached around the sculptured anodized aluminum Splice Eye. T-Toggle fitting has a 1/4" diameter pin.

C. S. Johnson Splice Line Fitting - Gate Eye to Splice Eye Fitting

Gate Eye to Splice Eye is used to help create a gate in Dyneema or Spectra lifelines. Threaded section typically passes through a stanchion with 3/4 to 1 inch of adjustable thread gap.

C. S. Johnson Splice Line Fitting - Splice Eye to Splice Eye Fitting

Splice Eye to Splice Eye is typically used to create a gate in Dyneema or Spectra lifelines. Threaded section typically passes through a stanchion with 3/4 to 1 inch of adjustable thread gap.

Johnson 40-506 Add-A-Cleat

It consists of a husky stainless steel bracket and clamp and a 4-1/2" long nylon coated aluminum cleat. It easily mounts to 7/8" or 1" diameter stanchion or rails with the included hose clamp.

C. S. Johnson Splice Line - Splice Eye with 1/4-28 Threaded Stud - Right Hand

No-Wire Splice Lines by Johnson. Use hi-tech 12-Strand to replace your wire lifelines. Replaces an existing 1/4-28 Right Hand lifeline turnbuckle stud fitting. Dyneema or Spectra line splices around the sculptured anodized aluminum Splice Eye.

C. S. Johnson Splice Line - Splice Eye with 1/4-28 Threaded Stud - Left Hand

No-Wire Splice Lines by Johnson. Use hi-tech 12-Strand to replace your wire lifelines. Replaces an existing 1/4-28 Left Hand lifeline turnbuckle stud fitting. Dyneema or Spectra line splices around the sculptured anodized aluminum Splice Eye.

C. S. Johnson Splice Line - Splice Eye with 5/16 Threaded Stud - Left Hand

No-Wire Splice Lines by Johnson. Use hi-tech 12-Strand to replace your wire lifelines. Replaces an existing 5/16-24 Left Hand lifeline turnbuckle stud fitting. Dyneema or Spectra line splices around the sculptured anodized aluminum Splice Eye.

Sherman Johnson Pelican Hook - Hand Crimp 1/8in Wire 26-403

Hand Crimped 1/8" Pelican Hook lifeline fitting designed for easy installation by the boat owner. A properly installed hand crimp fitting will hold 65-70% of the breaking strength of 7x7 cable.

Sherman Johnson Pelican Hook - Hand Crimp 3/16in Wire 27-403

Hand Crimped 3/16" Pelican Hook lifeline fitting designed for easy installation by the boat owner. A properly installed hand crimp fitting will hold 65-70% of the breaking strength of 7x7 cable.

CS Johnson 39-201 Split Backstay Car 1/4" Wire - Sheave Only

Equipped with aluminum sheaves and intended for boats up to 40' with a maximum 1/4" diameter wire.

CS Johnson 38-201 Split Backstay Car 3/16" Wire - Sheave Only

For boats under 30' with a maximum 3/16" diameter wire. This adjusting car replaces separate wire, and the tandem sheaves eliminate severe flexing of the backstay.

CS Johnson 38-203 Split Backstay Car 3/16" Wire - Sheave and Becket

For boats under 30' with a maximum 3/16" backstay wire diameter. The downhaul adjuster can use the becket and sheave to create a 3:1 purchase, eliminating the need for an upper block.

C. S. Johnson Replacement T-Toggle Turnbuckle Jaws

RH and LH T-Toggle type turnbuckle jaws, from #10 to 3/8" in thread diameter.

Sherman Johnson Replacement Open Body Turnbuckle Bodies

Replacement 1/4" to 3/8" diameter thread Open Body turnbuckle bodies. Silicon bronze for use with lifelines or rigging applications.

CS Johnson Replacement Tubular Turnbuckle Bodies

Replacement #10 to 5/16" diameter fine thread Tubular Turnbuckle bodies. Streamline closed body turnbuckles are great for smaller boats.

SJ 10-32 LH Turnbuckle Nut

SJ 46-250-1 Anchor Chain Tensioner for 5/16" Chain

It can free up the use of the bow cleat and prepare the anchor for sea conditions assuring you peace of mind.

C. S. Johnson Tubular Turnbuckle 1/4-28 04-100

Stainless steel tubular turnbuckle for wire size up to 5/32".

C. S. Johnson Replacement Toggle Nut Turnbuckle Jaws

RH and LH Toggle Nut type turnbuckle jaws, from 1/4" to 3/8" in thread diameter.

C. Sherman Johnson Tubular Turnbuckle 5/16-24 05-110

Stainless steel tubular turnbuckle suitable for wire up to 3/16" diameter.