Rule 98B Shower Drain 800 GPH with Multi-Port Inlet 12VView all products in Bilge Pumps - Electric

Rule 37A Automatic SuperSwitch

Rule 40A Rule-A-Matic Plus Float Switch

Designed for pumps drawing up to 20 Amps. The 40A Switch is not fused but can be combined with a fused Switch Panel like the Rule 41.

Rule 40FA Rule-A-Matic Plus with In-Line Fuse Holder

Includes fuse holder and is for use with Standard bilge pumps drawing up to 20 Amps. For use with 12V, 24V or 32V DC electrical systems.

Rule 41 3-Way Bilge Switch Panel Lighted

Toggle has three positions (Automatic, Off, or Manual) and has a "fail-safe" spring return to "Off" from the "Manual" position.

Rule 45 3-Way Panel Bilge Switch

Controls any pump equipped with an automatic float switch.

Rule 53S Fully Automatic Bilge Pump 2000 GPH

Float switches are not required. The pump will turn on every 2-1/2 minutes for about one second to sense for water.

Rule 56D Bilge Pump 4000 GPH 12V DC

Large 2" discharge outlet with an open flow rate of 4,000 GPH.

Rule 66 Side Mounting Bracket for Bilge Pump

Permits the round Rule 360, 500, 1100 pump models to be side mounted to a vertical stringer, a bulkhead or a transom.

Rule 98B-24 Shower Drain 800 GPH 3-Port 24V

24V Shower drain with automatic pumping without external floats or switches to tangle, stick or fail; Heavy duty construction; Completely submersible.

Rule Bilge Pump Strainer Base

Rule DB412 Dry Bilge Pump 4.0 GPM 12 Volt

Pumps down to 1/8" (3 mm) so you can have a dry bilge, and a dry bilge is a clean, odourless bilge. This new Rule bilge pump gets the last of the water out.

Rule High Speed Inflator/Deflator

The Rule High Speed Inflator/Deflator inflates a typical 4-man dinghy or a 120" X 72" X 22" family inflatable pool under 2 minutes. Adjustable nozzles have been included for most inflatables and valve types.

Rule LP900D LoPro Non-Automatic Bilge Pump 900 GPH

Only 58 mm high, the entire discharge body swivels up to 180 degrees for ease of installation, and the hose can also swivel 360 degrees for better routing. This non-automatic model requires a Float and, or a Panel switch.

Rule LP900S LoPro Automatic Bilge Pump 900 GPH

Fully automatic, low profile pump designed for tight spaces, only 2 1/4" tall and 9 1/4" long. Discharge body swivels up to 180 degrees for ease of installation.

Rule RM1100B Rule-Mate Automatic 1100 GPH Bilge Pump

Solid state water sensing technology eliminates the need for a separate float switch. Turns on when water level reaches approximately 2-1/2" and shuts off at 5/8".