Buy Raymarine EV200 Sail Pilot Kit in Canada Binnacle.com

Raymarine EV-200 Sail Pilot Kit - Linear Drive 24,000lb Displacement T70158

The Raymarine Evolution EV-200 Mechanical Linear Drive Sailboat Autopilot Pack includes:

EV-1 Sensor Core (E70096)
p70s Control Head (E70328)
ACU-200 Actuator Control Unit (E70099)
Evolution Cable Kit (R70160)
Type 1 Mechanical Linear Drive 12V (M81130)

Features:

General Features
- Evolution autopilots eliminate the need for complicated setup and calibration – once Evolution is installed, getting started is as easy as switching on the autopilot
- Thanks to the intelligent EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments
- Suitable for mechanically steered mid-size sailboats with max. displacement of 24,000 lbs
EV-1 Sensor Core
- Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
- Mounted above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing/submersion standards
- 9-Axis sensor monitors vessel motion in (3) dimensions
- Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
- Simple SeaTalk ^ng connectivity to control head and ACU
- Solid-state sensor technology delivers dynamic accuracy to within 2° in all conditions
- Auto-compensation for on board magnetic fields and reliable heading accuracy in northern and southern extremes
- Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays
p70s Control Head Sail
- Push-button operation control unit designed primarily for sailboats
- New LightHouse user interface is easy to learn and use
- Start-up wizard helps you configure the pilot quickly and easily
- Wide 160° horizontal and vertical viewing angles
- Advanced LED backlighting offers low power consumption and delivers vibrant colour and contrast
- Anti-reflective coating for improved visibility in bright sunlight
- Simple system and group dimming/illumination
- Supported autopilot modes include Auto, Standby, Pattern, Track, Wind Vane, Power Steer and Jog Steer
- Support for multiple data sources
- SeaTalk ^ng / NMEA 2000 and SeaTalk ¹ connectivity (no bridging required)
ACU-200 Actuator Control Unit
- Delivers reliable autopilot drive power and provides power to the SeaTalk ^ng bus
- Supports Type 1 Raymarine hydraulic, linear and rotary mechanical drives
- Provides a powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor
Evolution Cable Kit includes:
- (1) SeaTalk ^ng power cable (0.4m)
- (1) SeaTalk ^ng backbone cable (5m)
- (1) SeaTalk ^ng spur cable (0.4m)
- (1) SeaTalk ^ng 5-way connector block
- (2) SeaTalk ^ng T-piece connector
- (2) SeaTalk ^ng terminator
Type 1 Mechanical Linear 12V
- The outstanding design of the Raymarine linear drive unit provides:
  - powerful thrust, fast hard over times and quiet operation
  - low backdrive force, to minimize the drive's effect on the boat's steering when the autopilot is in standby
  - a powerful electric motor controlled by an electromagnetic fail-safe clutch, using a high tensile belt drive and epicyclic gearbox
  - high performance for minimum current consumption

Specifications:

EV-1 Sensor Core E70096
- Nominal Supply Voltage: 12 Volt DC
- Operating Voltage Range: 10.8 - 15.6 Volt DC
- Power Consumption: 30 mA
- Sensors:
  - 3-Axis digital accelerometer
  - 3-Axis digital compass
  - 3-Axis gyro digital angular rate sensor
- Data Connections: SeaTalk ^ng
- Waterproof Rating: IPX6
- Dimensions: 5.5" W x 5" H x 5" D
p70s Control Head Sail E70328
- Nominal Supply Voltage: 12 Volt DC
- Operating Voltage Range: 9 - 16 Volt DC
- Power Consumption: 69 mA (no lighting) / 134 mA (100% illumination)
- Data Connections: SeaTalk ^ng (2) and SeaTalk ¹ Compatible
- Display Size: 3.5" TFT LCD / 320 x 240 pixels
- Waterproof Rating: IPX6
- Dimensions: 4.33" W x 4.52" H
- Flush Mount Cutout: 3.54" dia.
ACU-200 Actuator Control Unit E70099
- Drive Current Output: Max. continuous 15 Amp
- Drive Clutch Output: Up to 2.0 Amp continuous, selectable between 12 / 24 Volt DC
- Nominal Supply Voltage: 12 or 24 Volt DC
- Operating Voltage Range: 10.8 - 31.2 Volt DC
- Power Consumption (standby) - Main Power Supply: 300 mA @ 12 / 24 Volt DC
- Power Consumption (standby) - SeaTalk ^ng : 20 mA @ 12 Volt DC
- Data Connections: SeaTalk ^ng
- Connections: Rudder reference sensor, sleep switch, power, drive motor, drive clutch, ground
- Waterproof Rating(s): Drip resistant
- Dimensions: 11.2" W x 8.3" H x 2.5" D
Max. Boat Displacement: 24,000 lbs
- Drive Clutch Output: Up to 2.0 Amp continuous, selectable between 12 / 24 Volt DC
- Peak Thrust: 650 lbs
- Max. Stroke: 12"
- Hard-over to hard-over time: 11 seconds
- Max. Rudder Torque: 6,500 lb.in
- Power Consumption: 18 - 36 Watts