Currently Shopping By
  CATEGORY: NMEA2000 Network Cables and Accessories
Clear All Items  
Shopping Options
By Price:$0.00 - $50.00

$50.00 - $100.00

$100.00 - $150.00

$150.00 - $200.00

Above $200.00

By Manufacturer:Ancor

Simrad Electronics

Actisense

Navico Electronics Brands

Lowrance

Garmin

Raymarine

 
NMEA2000 Network Cables and Accessories  

NMEA2000® Network Cables and Accessories

The NMEA 2000® standard contains the requirements of a serial data communications network to interconnect marine electronic equipment on vessels.

NMEA 2000® is a registered Trademark of the National Marine Electronics Association.

The standard describes a low-cost, moderate-capacity bi-directional, multi-transmitter/multi-receiver instrument network to interconnect marine electronic devices. It is multi-master and self-configuring, and there is no central network controller.

Equipment designed to this standard will have the ability to share data, including commands and status, with other compatible equipment over a single channel. It is based on CAN (Controller Area Network).

All products that read and or transmit NMEA 2000 information must be certified by NMEA.
Sort By :
Brand: 
Items Per Page :
Displaying 1 to 36 (of 78 products)  1       2       3       [ Next >> ] 
 
Actisense NGX-1-ISO NMEA2000 Gateway
Binnacle.com #: 15568 

Our Price: $259.95 
 
Actisense A2K-4WD NMEA 2000 4 Way Instrument Drop
Binnacle.com #: 37771 

Our Price: $139.95 
 
Actisense NGW-1-USB NMEA0183 to NMEA2000 with USB Connector
Binnacle.com #: 37665 

Our Price: $249.95 
 
Actisense NGX-1-USB NMEA2000 Gateway
Binnacle.com #: 15570 

Our Price: $279.95 
 
Actisense NMEA2000 Field Fit Connector Right-Angled Female A2K-FFC-RF
Binnacle.com #: 37775 

Our Price: $41.95 
 
Actisense NMEA2000 Field Fit Connector Right-Angled Male A2K-FFC-RM
Binnacle.com #: 37776 

Our Price: $41.95 
 
Actisense NMEA2000 Field Fit Connector Straight Female A2K-FFC-SF
Binnacle.com #: 37773 

Our Price: $39.95 
 
Actisense NMEA2000 Micro Gender Changer Female to Female 0.25m
Binnacle.com #: 37777 

Our Price: $45.95 
 
Actisense NMEA2000 Micro Gender Changer Male to Male 0.25m
Binnacle.com #: 37778 

Our Price: $45.95 
 
Actisense Pro-MUX-2 Professional NMEA 0183 Intelligent Multiplexer
Binnacle.com #: 14567 

Our Price: $899.95 
 
Actisense Pro-NBF-1 NMEA 0183 Buffer - 1 NMEA0183 Talker, 6 Listeners
Binnacle.com #: 10286 

Our Price: $449.95 
 
Actisense Smart Universal Micro Inline Terminator A2K-TER-U
Binnacle.com #: 14563 

Our Price: $53.95 
 
Actisense USG-2 NMEA0183 USB Converter USB to Serial Gateway
Binnacle.com #: 41399 

Our Price: $159.95 
 
Ancor NMEA 2000 Field Serviceable Connector
Binnacle.com #: 16464 
Our Price: $39.95 
 
Ancor NMEA 2000 Male Blanking Cap 270112
Binnacle.com #: 24547 

Our Price: $10.95 
 
Ancor NMEA 2000 Power Isolator
Binnacle.com #: 13408 

Our Price: $39.95 
 
Navico 000-12571-001 Transducer Adaptor Cable 9 Pin Black to 7 Pin Blue
Binnacle.com #: 37558 

Our Price: $47.95 
 
Navico 000-13313-001 Transducer Adaptor Cable 7 Pin to 9 Pin xSonic
Binnacle.com #: 40419 

Our Price: $46.95 
 
Navico 000-13977-001 Transducer Adaptor Cable 9 Pin to 7 Pin
Binnacle.com #: 37931 

Our Price: $54.95 
 
Navico Ethernet Male to RJ45 Female 5 Pin 2 Meter
Binnacle.com #: 17312 

Our Price: $57.95 
 
Navico N2k Extension Cable Micro-C 2 Meter
Binnacle.com #: 11731 

Our Price: $79.95 
 
Navico N2k Remote Button for MOB Alert
Binnacle.com #: 10585 

Our Price: $230.95 
 
Navico NEP-2 Network Expansion Port
Binnacle.com #: 37385 

Our Price: $418.60 
 
Navico NMEA2000 Micro-C Low Loss 4 Way Joiner 000-12612-001
Binnacle.com #: 37376 

Our Price: $79.95 
 
Navico Radar Cable for Halo20 and Halo20+ 10 Meter
Binnacle.com #: 13695 

Our Price: $164.95 
 
Navico Simnet Extension Cable - 2M
Binnacle.com #: 40741 

Our Price: $64.00 
 
Navico Simnet to Micro-C Cable 4M
Binnacle.com #: 37749 

Our Price: $62.00 
 
Navico Simnet to Micro-C Female Cable 1M
Binnacle.com #: 37943 

Our Price: $38.00 
 
Navico Transducer Adaptor Cable 9 Pin to Hook2
Binnacle.com #: 10034 

Our Price: $49.95 
 
Navico Yamaha Engine Interface Cable for NMEA2000
Binnacle.com #: 37559 

Our Price: $169.95 
 
Raymarine A06082 STng Male to DeviceNet Female Adapter
Binnacle.com #: 37764 

Our Price: $49.95 
 
Raymarine A06083 DeviceNet Male to STng Female Adapter
Binnacle.com #: 37765 

Our Price: $51.95 
 
Actisense A2K-SBN-1 Small Boat NMEA2000 Network 4 Way
Binnacle.com #: 37790 

Our Price: $129.95 
 
Actisense PRO-BUF-2 Intelligent NMEA0183 Buffer Type Approved
Binnacle.com #: 12936 

Our Price: $899.95 
 
Actisense W2K-1 NMEA2000 to WiFi Gateway
Binnacle.com #: 37316 

Our Price: $279.95 
 
Actisense NDC-4-AIS-USB NMEA0183 Multiplexer
Binnacle.com #: 31052 

Our Price: $409.95 
Sort By :
Brand: 
Items Per Page :
View as:  List  Column  Row  

 1       2       3       [ Next >> ] 

Ancor NMEA 2000 BASIC INSTALLATION GUIDE - Courtesy Ancor Products

 
Six Basic NMEA2000® Component Types and Where to Use
 
Power Tee
Connects to Power Source
 
The power tee connects the network to a power source. When connecting to a power source, remember to connect the positive wire to either an ignition switch or a stand- alone switch. This will ensure that your NMEA 2000 network is not draining power when not in use. The Ancor power tee is easily identified by the red tee with yellow couplers on both sides.
 
Backbone Cable
Connects the Tees
 
Backbone cables connect tee connectors to one another or to a power tee. Backbone cables are used when the power tee and device are at different locations or when multiple devices are at different locations along the network backbone. Ancor backbone cables have yellow couplers and are made from a heavier gauge wire than Ancor drop cables to help reduce voltage drop along the network backbone. Ancor offers backbone cables in 1.6ft (0.5m), 6.5ft (2m), 16ft (5m) and 32ft (10m) lengths.
 
Tee Connector
A point for breakoff connecting
 
Tee connectors create a point within the network backbone to add a drop cable and device. The network backbone will always be linear and may consist of any combination of backbone cables, tee connectors and a power tee. The yellow coupler on the tee connects to the yellow coupler on either side of the power tee or backbone cable. The black coupler on the tee connects to the drop cable. Ancor offers single, two way and four way tee connectors.
 
Drop Cable
Connects to the Tees of the Backbone
 
Drop cables connect the network backbone to NMEA 2000 devices. The drop cable connects the tee connectors' black coupler to the NMEA 2000 device. Ancor drop cables have black couplers and are made from a lighter gauge wire than Ancor backbone cables to allow easier wire routing from the network backbone to the NMEA 2000 device. Ancor offers drop cables in 1.6ft (.5m), 3.3ft (1m), 6.5ft (2m) and 16ft (5m) lengths.
 
NMEA 2000 device
Any electronic device with a NMEA 2000 connection and a NMEA 2000 communication protocol.
 
NMEA 2000 Certified devices and Approved components are strongly recom- mended as they ensure compatibility and proper data exchange. Common NMEA 2000 devices include chartplotters, engine instruments, GPS units and more.
 
Terminating Resistors
Terminating the connection
 
Terminators are required on each end of the network backbone to ensure signal integrity. The yellow coupler on the terminator will connect to the yellow coupler on a tee connector. Ancor terminators are offered with either a male or female coupler to attach to either side of a tee connector at the end of a backbone.

Adding Additional NMEA2000® Devices
  • To add another NMEA 2000 device to the network created in the instruction above, start by determining where you will need to place a drop cable for the device.
  • Once you have determined this location, disconnect the backbone at the closest backbone connection and add in a tee connector. When connecting several drop cables in a similar location use an Ancor 2-way or 4-way tee connector.
  • Reconnect the backbone connection(s) with the new tee connector in place.
  • Connect the drop cable to the black coupler on the tee and then connect to the new NMEA 2000 device.! WARNING Always make sure the NMEA 2000 network has ONLY two total terminating resistors (one at each end of the backbone) and is connected to a power source with a power tee in ONLY one location.
Network Limits
  • Total length of the NMEA 2000 network cannot exceed 328 feet (100 meters)
  • Each drop cable cannot exceed 19.7 feet (6 meters)
  • Total length of all drop cables within the network cannot exceed 256 feet (78 meters)