West's most versatile filler; creates a strong general purpose adhesive with a smooth texture. Excellent gap filling properties.
Epoxy thickened with Microfibers has good gap-filling qualities while retaining excellent wetting, and penetrating capability.
Thickening for maximum physical properties for hardware bonding and other applications requiring a strong interface between dissimilar materials.
Creates a low density fairing or surfacing compound with good load bearing strength. Sands easily and can be used in light structural applications.
A thickening additive that blends easily with West System Epoxy to create an extremely light, easily sanded fairing compound. Its smooth texture permits a fine feather edge.
Increases hardness and abrasion resistance of the coated surface and improves moisture resistance. Provides limited protection from ultraviolet light in areas not protected with other coatings.
Designed to improve cured epoxy's moisture-exclusion effectiveness. Used as a barrier coating additive to prevent gelcoat blistering in polyester fiberglass boat hulls.
Epoxy-based colorant used to tint the epoxy mixture to provide an even color base in preparation for the final finish. Coloured surfaces tend to highlight flaws and imperfections.
Mixed with West System epoxy to produce a low-friction exterior coating with increased scuff resistance and durability. Epoxy mixed with Graphite is commonly used as a low-load, low-speed bearing surface. Used as a coating on rudders and centerboards, or on the bottoms of racing boats that are dry sailed.
Proudly Serving Canada for over 25 years
The Binnacle 1065 Purcells Cove Rd. Halifax, NS, B3N 1R2