Xantrex XM1800 Pro Inverter 806-1810View all products in Inverters & Inverter Chargers

Xantrex 806-1810 XM1800 Pro Inverter

The 1800W UL 458 approved Modified Sine Wave Inverter with Transfer Switch and Hardwire input is designed for RV and marine electrical systems that already have a battery charger or generator installed,

Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank.

The Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed.

The PRO Series design is both user-friendly and versatile.

These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location.

A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available.

The Xantrex 1800W model is designed for demanding RV and marine conditions. It meets FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means it meets strict RV and marine safety standards.

Versatile enough to be mounted either horizontally or vertically, this inverter can be easily installed to fit into any compartment.

Performance:

• 1800W inverter easily powers TVs, small appliances, and other electronics
• Built-in 15A circuit breaker to protect GFCI connected loads
• Up to 25A pass through for hardwired loads
• Digital remote control displays power output, AC source and battery voltage
• A detachable remote control can be mounted wherever convenient
• Conformal coated electronics provide moisture resistance
• Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included)

• Battery over-voltage and under-voltage protection
• Over-temperature shutdown
• Automatic overload protection
• Short-circuit protection
• Ground fault protection

• Maximum continuous power 1800 Watts
• Surge rating 3600 W
• Output current (continuous): 15 A
• Output voltage (at no load): 115 V +/- 10 V
• Output frequency: 60 Hz +/- 1Hz
• Output waveform: Modified sine wave
• Peak efficiency 88%
• No-load power draw: < 6 W
• Power draw in standby mode: < 2 W
• Input operating voltage range: 11.0-15.5 VDC
• Transfer relay rating: 25 A
• Transfer time: <35 milliseconds
• Operating temperature range: 0°C - 40°C
• Storage temperature range: -20°C - 60°C
• AC receptacles: 2
• Recommended DC fuse: 250 A
• Dimensions (H x W x D) 4" x 8.3" x 15.5" (103mm x 211mm x 393mm)
• Weight (lbs): 9.5
• Manufacturers warranty: 1 Year
• Regulatory Approval: FCC Class 'B', UL 458