Special Deals on Marine and Boating Supplies and Equipment

Attwood SoftSide Dock Fender Bumper 45"

Seamless one-piece construction. Lifetime guarantee against chalking, splitting and crushing. No leaking air valves. Simple installation on wood and aluminum docks. 45" x 6"

Mooring Bridle Nylon Double Braid 3/4" X 18' - Single

Galvanized thimble spliced in one end, and a 12" soft eye in the other.

Mooring Bridle Nylon Double Braid 5/8" x 15' - Single

5/8" x 15' Nylon double braid mooring bridle with a galvanized thimble spliced in one end and a 12" eye in the other.

Taylor Hull Gard Fender White 5-1/2 x 20 in.

Hull Gard features a unique oval design which prevents the fender from rolling out of position.

Deck Mat - Welcome Aboard 18" x 30"

Made from our UV resistant, stain resistant marine grade carpet material and back with a non-skid, non marking rubber that won't deteriorate over time.

Attwood Corner Dock Fender 12in. x 12in.

Molded from a lightweight polymeric material that is soft to the touch, easy on hulls, and resistant to UV, chalking, splitting, and crushing.

Polyform 50 Net Buoy Galvanized Shackle 1-1/4" Insert

The 1-1/4" diameter x 1-3/4" wide plastic PVC insert helps distribute load evenly over the entire rope hold area for maximum performance and longevity.

Wichard Mooring Hook Medium 92327

Mooring Hook can be fitted to all types of boat hooks and employs famous Wichard torsion spring to make the job of tying up to mooring buoys a snap.

Bravo 7M Foot Pump 5 Litre

Inflates and deflates. The built-in pressure gauge allows you to monitor pressure up to the maximum of 400 mbar (5.8 PSI).

Victory Anchor Chain Hook 1/4 - 5/16 to Unload Windlass

Used to facilitate anchor bridle attachment by grabbing a chain link so as to remove the load from the windlass whilst moored.

Sea Dog 182608 Anchor Swivel for 1/4" and 5/16" Chain

Designed to easily slide over anchor rollers to prevent snagging and minimize the wear on the bow roller and windlass.

Victory Anchor Chain Connector & Universal Joint Swivel Swivel - 1/4" and 5/16" Chain

For 1/4" and 5/16" diameter chains and intended for use with smaller-sized anchors.

Danforth S600 9 Lb Standard Anchor

This Danforth is designed for boats between 17' and 27' and features two large triangular flukes attached to the stock, allowing the flukes to orient toward the seabed at a 32-degree angle for maximum holding capabilities in common sea bottoms.

Brass Boat Hook End for 1-3/8" Pole

Length: 7-1/2". Boat Hook only - does not include pole

Taylor Tuff End Mooring Ball 18 in. White

Danforth S300 5 Lb Standard Anchor

It is designed for boats 10 to 17 feet based on 20-knot winds. The world's most trusted Anchor since 1939. Danforth offers exceptional holding power for its weight.

Lofrans Windlass Control Switch Dash Mount

Danforth S920 14 Lb Standard Anchor

Danforth utilizes high tensile 4130 steel for increased strength, and every anchor is hot-dip galvanized for long-lasting protection and recommended for boats between 27 and 31 feet.

Anchor Connector - Swivel - Toggle - 5/16 in. Chain

Victory Anchor Chain Connector Swivel 5/16" and 3/8" Chain

It fits a 5/16" and 3/8" chain.

Sea Dog 321850 Chain Gripper Plate

Stabilizes anchor chains and reduces stress on a windlass when anchored in heavy seas. Investment cast 316 Stainless Steel and fits 5/16, to 1/2" anchor chain.

Anchor Connector Swivel with Toggle - 3/8" Chain

Anchor Chain Hook 316 Stainless For 3/8 in. Chain

Length: 4-1/4", Width 2-1/2". AISI 316 Stainless steel

Sea Dog 328052 Short Bow Roller

Stainless steel anchor roller for boats 20' to 30' with anchors up to 35 pounds. Can handle line up to 1" in diameter and up to 3/8" anchor chain.

Schaefer AH-100 Anchor Hanger for Danforth Style Anchors

Pulpit mount anchor hanger. Works with Danforth style fluke anchors from 8 to 22 pounds in weight.

Chain Deck Pipe with Hinged Cover Stainless Steel

Hinged cover with spring keeps the cover closed, while the sliding rod mechanism will lock the cover open. Overall dimension: 5-1/2" x 4-1/4".