Special Deals on Marine and Boating Supplies and Equipment

Antal 549.112 V-Cam 814 Rope Clutch Single 3/8-1/2" (10-12 mm)

The curved base V-Cam increases the bearing surface preventing the load from being concentrated at a critical point. Line retrieval can be achieved with the lever closed stopping automatically in the new position with no slippage.

Antal 549.122 V-Cam 814 Rope Clutch Double 3/8 - 1/2" (10-12 mm)

The curved base V-Cam increases the bearing surface preventing the load from being concentrated at a critical point. Line retrieval can be achieved with the lever closed stopping automatically in the new position with no slippage.

Antal 549.132 V-Cam 814 Rope Clutch Triple 3/8 - 1/2" (10-12 mm)

The curved base V-Cam increases the bearing surface preventing the load from being concentrated at a critical point. Line retrieval can be achieved with the lever closed stopping automatically in the new position with no slippage.

EasyLock Replacement Handle for EasyLock 1 Rope Clutch

Spinlock CAM-0610 Cam Module 6-10 mm XTS XCS XT and XC

Replacement CAM for Spinlock XTS, XCS, XT and XC power clutches.

Spinlock CAM-0610C Ceramic Cam Module XTS/XCS 6-10 mm

Upgrading your Spinlock Bases and Cams to ceramics will help resist the polishing and wear caused by high tech rope fibres such as Aramid, Technora, Codura or Vectran and allows for faster engagement on to loaded line.

Spinlock CAM-0814 Cam Module 8-14 mm XTS XCS XT and XC

Suitable for use with line diameters 8mm to 14mm (5/16" - 9/16") in diameter.

Spinlock CAM-0814C Ceramic Cam Module XTS/XCS 8-14 mm

Upgrading your Spinlock XTS with Ceramic Bases and Cams to help resist the polishing and wear caused by high-tech rope fibres such as Aramid, Technora, Codura or Vectran. They allow for faster engagement on these loaded lines.

Spinlock CAM-XAS Cam Module XAS/XA

Replacement Cam for all Spinlock XAS Clutches. Compatible with any XAS Clutch.

Spinlock TWF-RET Winchfeeder Retaining Clip

Spring retaining clip applies pressure on the top of Spinlock TWF/50M and TWF/63M Winchfeeder to keep the line engaged.

Spinlock TWF/50M Winchfeeder 50 mm

Fit a 2" diameter Winchfeeder aft of a Clutch to divert lines up to 1/2" in diameter to an alternative winch.

Spinlock TWF/63M Winchfeeder 63 mm

63mm Sheave Winchfeeder diverts lines aft of a clutch, up to 1/2" diameter, to an alternative winch.

Spinlock X-BASEC Ceramic Base XTS/XCS

Upgrading your Spinlock Bases and Cams to ceramics will help resist the polishing and wear caused by high tech rope fibres such as Aramid, Technora, Codura or Vectran and allows for faster engagement on to loaded line.

Spinlock X-LBL Handle Labels

Replacement Spinlock handle labels for identification. Suitable for XAS, XCS and XTS Rope Clutches.

Spinlock XAS-BASE0612 XAS & XA Clutch Base Module 6-12mm

Replacement or upgrade base for XA or XAS Clutches to give optimized holding on 1/4" to 1/2" diameter lines.

Spinlock XAS-HDL Clutch Handle

Replacement handle for Spinlock XAS rope clutch.

Spinlock XAS-KIT XAS Clutch Service Kit

Complete service kit for XAS clutches.

Spinlock XAS-SIDE Side Fairings

Replacement side fairings for XAS clutches.

Spinlock XAS-SMNT Sidemount Kit for XA and XAS clutches

Kit for side mounting Spinlock XAS Clutches.

Spinlock XAS0612/1 Single Rope Clutch

Single rope clutch for 1/4" to 1/2" rope. Perfect for racing boats up to 27' and cruisers up to 35'.

Spinlock XAS0612/2 Double Rope Clutch

Double clutch for 6 to 12mm line. (1/4" to 1/2") Loads up to 575 kg (1270 lbs). Suitable for racing boats up to 27' and cruising yachts up to 35 feet.

Spinlock XAS0612/3 Triple Rope Clutch

Triple clutch for lines 1/4"-1/2" (6-12 mm) . Loads up to 575 kg (1,270 lbs). Suitable for racing yachts up to 27 feet and cruisers up to 35 feet.

Spinlock XAS0612/4 Quad Rope Clutch

for 6 to 12mm line. (1/4" to 1/2") Loads up to 575 kg (1270 lbs). Suitable for racing boats up to 27' and cruising yachts up to 35 feet.

Spinlock XAS0612/HP Port Side Mount XAS Clutch 6 mm - 12 mm

Side mounting is usually the neatest solution for spars, side decks and coamings. This horizontal mount rope clutch is for 1/4" to 1/2" diameter rope. Perfect for racing boats up to 27' and cruisers up to 35'.

Spinlock XAS0612/HS Starboard Side Mount XAS Clutch 6 mm - 12 mm

Horizontal Starboard side mount rope clutch for 1/4" to 1/2" rope. Perfect for racing boats up to 27' and cruisers up to 35'.

Spinlock XTR0812 Powerclutch XTR 8 mm - 12mm White Black or Silver

New mid to higher load rope holding. Fits lines 5/16" to 1/2" in diameter and loads up to 2,200 lbs. Available in White, Black or Silver.

Spinlock XTS0610/1 Single Rope Clutch 6 mm - 10mm

For 6-10mm diameter lines and optimized for 8-10mm lines and strongly recommended for high strength small diameter lines.

Spinlock XTS0610/2 Double Rope Clutch 6mm - 10mm

For 1/4"-3/8" (6-10 mm) lines and optimized for 5/16"-3/8" (8-10 mm) lines. Strongly recommended for high strength small diameter line.

Spinlock XTS0610/3 Triple Rope Clutch 6mm - 10mm

For 1/4"-3/8" (6-10 mm) lines and optimized for 5/16"-3/8" (8-10 mm) lines. Strongly recommended for high strength small diameter line.

Spinlock XTS0814/1 Single Rope Clutch 8 mm - 14 mm

The XTS0814 Clutch is for lines 8mm to 14mm in diameter. It has a Maximum Working Load at a Maximum Line Diameter of up to 1,000kg.

Spinlock XTS0814/2 Double Rope Clutch 8 mm - 14 mm

Double Spinlock XTS Rope Clutch for lines 8-14mm (5/16" - 9/16") in diameter. Handles loads up to 1000kg.

Spinlock XTS0814/3 Triple Rope Clutch 8 mm - 14 mm

Triple Spinlock XTS Rope Clutch for lines 8-14mm (5/16 - 9/16") in diameter. It has a Maximum Working Load of up to 1,000kg at a Maximum Line Diameter.

Spinlock XTS0814/4 Quad Rope Clutch 8 mm - 14 mm

The Spinlock XTS0814/4 Quad Rope Clutch is available for lines 8-14mm (5/16 - 9/16") in diameter. It has a Maximum Working Load of up to 1,000kg at a Maximum Line Diameter.

Spinlock XX0812 PowerClutch Black

Secure clutching for high loads. The XX0812 offers high performance on lines 8 to 12mm in diameter and loads up to 3,968 lbs (1,800 kgs).