This Item does not qualify for Free Shipping! More Info...
Rocna Galvanized Anchor 6 Kg
For multi-hulls: use the Sizing Chart as instructed, then select the anchor model one size larger
The Rocna was designed in New Zealand by Peter Smith, a Kiwi boat-builder and cruiser.
Dissatisfied with the performance of currently available anchors, Mr. Smith spent several years developing an anchor which would address the shortcomings identified in other anchors he'd used.
Testing each prototype aboard his 50' 27-ton aluminum alloy sloop Kiwi Roa, the design was improved until he was satisfied that he had achieved the optimal combination of features. Rocna: New-Generation Anchor Recent independent tests by Sail Magazine, Practical Sailor and Cruising World show that Rocna New-Generation type anchors consistently outperform the more traditional plow and claw-type designs.
The Rocna’s unique design delivers outstanding performance, as displayed in the Sail Magazine anchor testing, where Rocna was the #1 performing anchor in the critical “Max Hold Before Release” test - the maximum holding power generated before the anchor started to drag.
The Rocna provided over 40% higher holding power than the second best anchor!
The Rocna implements several features which contribute to its unique combination of quality, performance, and cost-effectiveness.
Selecting the correctly sized anchor to match your boat is not quite as simple as it may first seem. There are many factors to consider, including displacement, overall length, windage profile, and the conditions in which you intend to use your Rocna. Most manufacturers provide a very simple guide using only LOA, or displacement, for their different anchor sizes. We have gone a step further.
The following chart will give you a good indication of which Rocna we would recommend for your vessel. Match your vessel’s length with the most appropriate displacement in metric tonnes (T) (2,200 lbs) - if in doubt, always tend toward the larger anchor model.
There is a tendency amongst anchor manufacturers to recommend sizes smaller than required. For example, a certain world-renowned name-brand advises the use of a 20 Kg anchor on a heavy cruising yacht of LOA up to 14.8m. This recommendation is clearly far too light.
Another brand states that “a working anchor should hold up to 30 knots of wind”. Again, we consider this recommendation would lead to an undersized anchor.
We have resisted this temptation, and the above recommendations are appropriate for heavy-duty use. In our view, a working anchor should hold its boat in all but the most extreme weather.
Free Ground shipping via Canada Post (UPS or Purolator for some locations) within Canada on most orders of $99 or more (pre-tax). Q. What do we mean by most orders? A. Some items are exempt from this offer and are indicated on the product page. Exempt items are usually bulky or heavy items such as buoys. Over 98% of the items on Binnacle.com qualify for the free shipping offer. To see what your shipping charge (if any) will be you can add the item(s) and quantities to the shopping cart and you will see a shipping cost calculator
Remote areas which require an "air stage" for delivery are exempt from Free Shipping offer. These are typically remote northern areas. Nunavut as well as many parts of the Yukon and NWT are exempt from free shipping
Designed in New Zealand by Peter Smith, a Kiwi boat-builder and cruiser. Rocna’s unique design delivers outstanding performance.
Extremely rugged construction resists deformation even under heavy or shock loading.
Rollbar ensures anchor will immediately turn over and start to penetrate. Increases tip force, ensuring rapid penetration even in hard or weedy conditions.
Independent tests by Sail Magazine, Practical Sailor and Cruising World show that Rocna New-Generation type anchors consistently outperform the more traditional plow and claw-type designs.
In Sail Magazine anchor testing the Rocna provided over 40% higher holding power than the second best anchor.
Recent independent tests by Sail Magazine, Practical Sailor and Cruising World show that New-Generation type anchors consistently outperform the more traditional plough- and claw-type designs
All steel construction with no lead inserts. Thicker steel sections provide higher strength for a given anchor weight. A tight curve radius between shank and blade locks the anchor into the bow roller, preventing movement even when working into heavy seas.
Tenacious holding power. Sand, mud, clay or weeds it stays buried even with veering loads. Rugged construction, with a high tensile shank.
Carefully designed to offer the greatest possible compatibility across a wider range of vessel bow configurations, particularly powerboats with a bow pulpit. Vulcan brings the security and reliability of the Rocna anchor to a wider range of boaters who Rocna believe desire improved anchoring performance.
Vulcan brings the security and reliability of the Rocna anchor to a broad range of boaters who Rocna believes want improved anchoring performance.
Breaking from the highly successful and acclaimed Rocna design, the Vulcan features a unique combination of shank and fluke geometry which self-rights the anchor on the seabed without the use of a roll-bar. This is assisted by the V-Bulb which extends fluke ballast downward to gain maximum leverage and efficiency.
Capitalizes on finely tuned design elements, infusing many of the original Rocna's proven performance advantages for an extremely quick and reliable set across a range of seabeds combined with rock solid holding power.
The Vulcan is carefully designed to offer the greatest possible compatibility across a wider range of vessel bow configurations, particularly powerboats with a bow pulpit.
Proudly Serving Canada for over 25 years
The Binnacle 1065 Purcells Cove Rd. Halifax, NS, B3N 1R2