Restore Water Repellency to Marine Fabrics
Over time, exposure to sun, rain, and salt air breaks down the water-repellent finish on marine fabrics. Star Brite Waterproofing with PTEF is designed to restore that protection quickly and easily. Whether you are treating a weathered bimini top, a boat cover that has started to soak through, or a set of sail covers showing their age, this spray-on formula brings back the water-shedding performance the fabric had when it was new.
The formula is safe for use on all premium marine fabrics, including Sunbrella and other acrylic canvas materials. It is also effective on nylon, canvas, and finished leather, making it a versatile choice for a wide range of applications both on and off the water.
UV and Stain Protection Beyond Waterproofing
Star Brite Waterproofing does more than repel water. It also provides an additional barrier against UV rays and staining, which are two of the most common causes of premature fabric degradation on boats. UV exposure can cause colours to fade and fibres to weaken over time, while stains from bird droppings, tree sap, and general grime can be difficult to remove once they set.
Applying this product to new fabrics before they are ever exposed to the elements is an especially effective strategy. By treating new boat covers, bimini tops, or cockpit cushion covers right out of the box, you can significantly extend their service life and reduce the frequency of deep cleaning.
Versatile Use On and Off the Boat
While Star Brite Waterproofing is formulated with marine fabrics in mind, it works equally well on a broad range of outdoor gear and coverings. This makes it a practical product to keep on hand for general maintenance around the dock, the campsite, or the garage.
- Boat covers and bimini tops
- Sail covers and dodger canvas
- Foul weather gear and sailing jackets
- Convertible tops and car covers
- Tents, tarps, and awnings
- Backpacks, boots, and patio covers
Easy Application with No Change to Fabric Feel
Applying Star Brite Waterproofing is straightforward. Spray the product evenly onto the fabric surface and allow it to dry for 6 hours before exposing it to moisture or use. Once dry, the treatment does not change the breathability, colour, or feel of the fabric, so treated canvas and gear perform and look exactly as they did before.
The sprayer included with the bottle is specially designed for waterproofing solvents. It may require ten or more pumps to prime before it begins spraying, which is normal for this type of applicator. This is worth keeping in mind before your first use, particularly if you are accustomed to standard water-based product sprayers.
Fabric Compatibility and Important Precautions
Star Brite Waterproofing is compatible with most quality outdoor fabrics, including nylon, canvas, finished leather, and acrylics such as Sunbrella. However, some economy materials, including polyester and urethane-backed fabrics, are not compatible with solvent-based products. Always check the fabric type before applying.
It is also worth noting that solvent-based products can affect the adhesive used on some carpeting and may further degrade fabrics that are already heavily sun-damaged. When in doubt, test on a small, inconspicuous area first.
Always apply Star Brite Waterproofing outdoors in a well-ventilated area, and take care not to breathe the solution. The product contains petroleum distillates and is a combustible liquid, so keep it away from heat sources, open flames, and sparks during application and storage.
Coverage and Value
The 22 oz. bottle provides approximately 80 square feet of coverage, though this may vary slightly depending on how heavily the product is applied per square foot. For boaters with multiple fabric surfaces to treat, or those who want to keep a bottle on hand for seasonal maintenance, this size offers a practical balance of coverage and convenience.
PTEF is Star Brite's registered trademark name for polytetrafluoroethylene, the active ingredient that provides the water-repellent and protective properties in this formula.
Specifications
- Volume: 650 ml (22 oz.)
- Coverage: Approximately 80 square feet per bottle
- Dry Time Before Use: 6 hours
- Physical State: Liquid
- Appearance: Clear to amber liquid
- Odour: Petroleum
- Specific Gravity: 0.78 at 20°C (68°F)
- Melting Point: -70°C (-94°F)
- Boiling Point: 149-204.5°C (300.2-400.1°F)
- Flash Point: 62.5°C (144.5°F)
- Solubility: Insoluble in water
- Active Ingredient: Polytetrafluoroethylene (PTEF)
- Primary Ingredient: Petroleum distillates, hydrotreated light (CAS No. 64742-47-8), 80-100% w/w
- Secondary Ingredient: Solvent naphtha, petroleum, medium aliphatic (CAS No. 64742-88-7), 1-5% w/w
- Compatible Fabrics: Nylon, canvas, finished leather, acrylics (including Sunbrella)
- Incompatible Fabrics: Polyester, urethane-backed fabrics
- Application Method: Spray-on
- MFG Part Number: 081922PC
- Binnacle SKU: #21189
Key Features
- Restores water repellency to worn marine fabrics: brings boat covers, bimini tops, and sail covers back to like-new performance
- UV protection included: helps prevent colour fading and fibre degradation caused by sun exposure
- Stain resistance: creates a barrier that makes cleaning easier and keeps fabrics looking better longer
- Safe for Sunbrella and premium marine fabrics: use with confidence on quality acrylic canvas and nylon
- Preserves fabric breathability and feel: treated surfaces perform and feel exactly as they did before application
- Effective on new fabrics: applying before first use significantly extends service life
- Wide range of applications: suitable for boat covers, bimini tops, foul weather gear, tents, tarps, awnings, and more
- Simple spray-on application: no scrubbing or rinsing required, just spray and allow 6 hours to dry
- Compact bottle with broad coverage: one 22 oz. bottle treats approximately 80 square feet of fabric
- Solvent-based formula with PTEF: uses polytetrafluoroethylene to deliver durable water-repellent protection
Starbrite 819XX Waterproofing MSDS NA_EN |