Raymarine RSW Wired Smart Performance Wind Transducer Binnacle.com

Raymarine E70670 RSW Wired Smart Performance Short Arm Wind Transducer

The groundbreaking RSW Series Wind sensors are intelligent self-calibrating sensors that deliver ultra-precise wind speed and direction measurements.

Sailors can use advanced wind, speed, and polar calculations to make smarter race and performance sailing decisions when it matters most.

The RSW Wired Smart Wind transducer is a professional-level wind sensor designed to deliver highly accurate calibrated wind speed and direction data and supplied with a 30m Smart Wind mast cable as standard.

Raymarine Smart Wind technology delivers expert-level accuracy without additional, expensive processors or extensive calibration and set-up. Combined with 3D motion sensors, the result is a self-calibrating, 9-axis AHRS-enhanced wind sensor that adapts to its environment to deliver precision wind data.

Through rigorous wind tunnel testing, Raymarine has fine-tuned and balanced the instrument to ensure that data from the masthead is accurate and consistent.

With the Alpha Performance Displays and an Axiom Chartplotter, the RSW Wind lets you sail smarter with trusted, highly accurate True Wind data.

Physical Dimensions:

Length: Wind transducer (including cable): 657.762 mm (25.90")
Wind transducer (excluding cable): 540.712 mm (21.29")
Wired gateway: 155.61 mm (6.13")
Width: Wind transducer: 46.96 mm (1.85")
Wired gateway: 47.38 mm (1.88")
Height: Wind transducer: 305.86 mm (12.04")
Wired gateway: 30.61 mm (1.21")

What's in the box?

#1 - No.10 x 3/4" self tapping screws x 4 (for mounting the wind transducer)
#2 - No.7 x 3/4" self tapping screws x 2 (for mounting the gateway)
#3 - 40 mm (1.57 in) heat shrink tube (required to insulate ground wire when shortening the mast cable)
#4 - Ring crimp terminal (required for additional ground connection when the gateway is not mounted on a metal surface)
#5 - Mast cable, 30 m (98.43 ft) reel
#6 - Documentation
#7 - Wind transducer
#8 - Smart Wind Wired Gateway
#10 - SeaTalk NG to DeviceNet adaptor cable, 120 mm (4.72")