Scanstrut ROKK Catch Wireless Phone ChargerView all products in 12 Volt Accessories

Balmar ARS-5 Voltage Regulator with Harness

Provides precise voltage control for Balmar high-output 12-Volt alternators and other externally regulated P-type (positive field) alternators.

Balmar MC-618-VL-01 Valeo Regulator Kit MC-618 12V

Balmar SG205 Smartgauge Battery Monitor with SmartShunt & Bluetooth® Gateway

All the features of a Smargauge SG200 on your device. Now you can determine your battery(s) condition from anywhere with the Bluetooth® Smartphone App to keep information in your pocket.

Marinco GFCI Receptacle

Power Rating: 15-Amp, 125-Volt. Required by the ABYC for Receptacles Located Outdoors or Near Water. Color: Ivory

Scanstrut Flip Pro 12/24V Fast Charge Dual USB-A/C Socket SC-USB-F1

Designed for use with either a 12V or 24V input and features a USB-A and USB-C charging port. Charging up to 36W on a 12V system or up to 60W on a 24V system.

Blue Sea 4366 Water-Resistant Accessory Panel 12V Socket, Dual USB Charger Mini OLED Voltmeter.

Designed to be mounted below, this 12V Accessory panel has a single Dual USB and 12V Charging Socket. In addition, it has a Mini OLED Voltmeter and the integrated circuit breaker can prevent a parasitic draw.

Blue Sea 4368 Water-Resistant Accessory Panel 12V Socket, 2 USB Chargers, Mini Voltmeter

Panel front is IP66 when mounted with the gasket in place - protected against powerful water jets. Includes a 15A circuit breaker switch and a pre-wired harness with dual USB and a 12V Charging Socket. Also, it has a Mini OLED Voltmeter and the integrated circuit breaker prevents a parasitic draw.

Balmar Max Charge MC-618-H Multi-Stage Voltage Regulator with Harness

Designed to provide precise voltage control for Balmar's high-output 12-volt alternators and other externally regulated P-type alternators, the MC-618 features eight user-selectable programs

Balmar SG200 Smartgauge Battery Monitor

The SG200 is designed to monitor a battery or battery bank, which is used in deep cycling applications. It relies on the battery being discharged and then charged to learn the battery’s characteristics. This learning process may never occur on a start-only battery since it is never cycled. However, The SG200 does have two additional leads to connect to starting batteries to read voltage only.

Scanstrut ROKK Waterproof Wireless Phone Charger - Bezel Install

Scanstrut ROKK, the worlds first waterproof wireless inductive charger.

Scanstrut ROKK Waterproof Wireless Phone Charger - Hidden Install

Sub-surface, hidden from view and charges through the surface. Pocket or bond install ideal for GRP or wood. IPX6 waterproof.

Scanstrut ROKK Waterproof Wireless Phone Charger - Surface Install

Low-profile, flush-mounted wireless charge pad with an ultra grippy, non-slip surface. Designed to fit to any smooth surface, indoors or out.

Balmar 44-SG-12/24 Smartgauge Battery Monitor

It provides highly accurate monitoring without the hassle of installing a shunt module to count amperes. The easy-to-understand display, dependable State-of-Charge Percent (SoC%) reading and ease-of-use mean that even the most technically challenged crew member can understand just how much power is left in the battery.

Blue Sea 1045 Dual USB Charger - Socket Mount 12/24V

An intelligent charging device that recognizes what it is being asked to charge.

Blue Sea 4363 BelowDeck 12V Charging Center

Designed to be mounted below, this 12V panel has dual USB and 12V Charging Sockets, with an integrated circuit breaker that can prevent a parasitic draw.