Buy Simrad NAC-2 Autopilot Core Pack 000-13335-001 in Canada Binnacle.com

Simrad NAC-2 Autopilot Core Pack 000-13335-001

This pack includes the core components you need to upgrade your boat with either a Simrad, B&G or Lowrance autopilot system and is designed for rudder-steered vessels up to ten metres (35') in length.

Just add a drive unit to suit your steering system, and choose a dedicated autopilot controller or appropriate Simrad, B&G or Lowrance multifunction display.

Pack includes the Simrad NAC-2 autopilot computer, an RF25N rudder feedback unit, Precision-9 solid-state Compass, plus all cabling and connectors required to build an NMEA 2000® network backbone or connect this autopilot system to an existing NMEA 2000® network.

Suitable for use with low-current drive pumps including the Simrad RPU80, Mechanical drives such as the Simrad SD10, Hydraulic Linear drives such as the HLD350, and Solenoid valves.

Add a dedicated autopilot controller, or control your autopilot from your existing Simrad multifunction display.

Install extra autopilot stations, ideal for dual-helm vessels, or add the Simrad WR10 wireless remote for instant steering and autopilot control from anywhere onboard.

Plug-and-play connectors minimize the need for manual wiring and facilitate easy installation.

Auto-tuning simplifies setup and ensures optimal steering performance, while automatic compass calibration continuously improves heading accuracy as you travel.

Industry-standard NMEA 2000® networking offers reliable connectivity to sensors, autopilot controllers, and multifunction displays located anywhere onboard.

Core autopilot system components - just add a Drive unit and Controller.

Ideal for rudder-steered boats up to 10 metres (35') in length
Suitable for low-current pumps, mechanical drive units, hydraulic linear drives or solenoid valves (8 A continuous/16 A peak).
Power consumption - Maximum: 500 W
Recommended fuse rating: 20 A
Take control with the Simrad AP44 Autopilot Controller, an IS42 display or the OP12 Keypad, or a networked multifunction display
Easy setup with automatic tuning and compass calibration
Plug-and-play connectors for easy installation

In the Box:

RF25N Medium duty rudder feedback unit with SimNet / NMEA 2000® interface 000-10756-001
MICRO-C N2k Backbone Starter Kit 000-10760-001
Precision-9 Compass - Solid-state compass with heading, rate of turn, pitch and roll output over NMEA 2000® 000-12607-001
Simrad NAC-2 Autopilot Computer 00-13249-001

_{NOTE: Requires a hydraulic steering pump or mechanical drive unit, and a compatible autopilot controller or networked multifunction display. Remember to add 20% to your boat's "design" displacement to allow for gear, fuel, water etc. The resulting displacement number should be less than the autopilot's maximum rated displacement. When choosing an autopilot, "bigger is better."}