Blue Sea 2104 PowerBar 600A DC Bus Bar 4 x 3/8" StudsView all products in Bus Bars Junction & Terminal Blocks

Blue Sea 2104 PowerBar 600A DC Bus Bar Four 3/8"- 16 Studs

It is useful for supplying high current to large loads.

It can be used to branch large wires to progressively smaller bus bars that then distribute current to smaller load devices.

In addition to the four large stud terminals for high current carrying large wire terminals, it has four screw terminals (two on each end) for low-current, small-wire connections.

When supplying high current to a number of large loads such as a windlass, an inverter, and the DC Main circuit breaker panel, you may want to use a 600A bus bar on the positive side of the house battery circuit.

Instead of connecting multiple terminals to a battery switch stud, use the 2104 high ampacity bus bar.

The Blue Sea 2104 is also useful as a negative tie point with its continuous amperage rating of 600A DC.

In boats with two or more engines and two or more battery banks, use the 2104 600A bus bar to tie together engine blocks and battery bank negative terminals.

_{According to the American Boat and Yacht Council (ABYC) rules: 11.5.2.4. "Multiple-Engine Installation - If a boat has more than one engine with a grounded cranking motor, which includes auxiliary generator engine(s), the engines shall be connected to each other by a common conductor that can carry the cranking motor current of each of the grounded cranking motor circuits."}

Features:

• Recessed mounting holes eliminate shorts to mounting surfaces.
• Tin-Plated Copper bus won't corrode and stays conductive.
• Stainless steel studs allow high torque for good electrical contact.
• CE Marked

Specifications:

• Maximum Voltage 300V AC / 48V DC
• Number of Terminal Studs: 4
• Terminal Type: 3/8"-16 Stud
• Terminal Stud Torque: 140 in-lb (15.82 Nm)
• Continuous Rating:
  • 545A AC
  • 600A DC
• Base Material: UL 94-V0 Rated, Glass Reinforced Thermoplastics
• Bus Material: Tin-Plated Copper CDA 110/UNS11000
• Screw Terminal Torque: 15 in-lb (1.69 Nm)
• Stud Torque: 140 in-lb (15.82 Nm)
• Weight: 1.75lb (0.79 kg)