This Item qualifies for Free Shipping on orders over $99! More Info...
West G/Flex Thickened Epoxy Adhesive 2 x 4 oz. Tubes 655-8
West G/Flex is a toughened, versatile epoxy that is conveniently pre-thickened for permanent waterproof bonding of plastic, fiberglass, ceramics, metals, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants.
This gives G/Flex 655 the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials.
Mixed at a 1:1 ratio, G/Flex 655 gives you 45 minutes of working time at 72°F. It reaches an initial cure in 7 to 10 hrs and full cure in 24 hrs. (8 fl. oz./250 mL)
Free Ground shipping via Canada Post (UPS or Purolator for some locations) within Canada on most orders of $99 or more (pre-tax). Q. What do we mean by most orders? A. Some items are exempt from this offer and are indicated on the product page. Exempt items are usually bulky or heavy items such as buoys. Over 98% of the items on Binnacle.com qualify for the free shipping offer. To see what your shipping charge (if any) will be you can add the item(s) and quantities to the shopping cart and you will see a shipping cost calculator
Remote areas which require an "air stage" for delivery are exempt from Free Shipping offer. These are typically remote northern areas. Nunavut as well as many parts of the Yukon and NWT are exempt from free shipping
Ideal for building composite laminates and repairing fiberglass structures. May also be used to provide abrasion resistance to wood structures.
West 105 Epoxy Resin is the base material on which all West System epoxy compounds are built.
West System resin, the primary building block to which everything else is added. The resin is a clear, pale amber, low viscosity liquid epoxy resin.
For use at lower working temperatures, or to produce a rapid cure that develops its physical properties more quickly at room temperature.
205 Fast Hardener is for use at lower working temperatures, or to produce a rapid cure that develops its physical properties quickly, at room temperature.
Slow hardener for use when extended working and cure time is needed or to provide adequate working time at higher temperatures.
Slow Hardener for when extended working, and cure time is needed or to provide adequate working time at higher temperatures. Minimum recommended temperature: 16°C.
Largest consumer pack of 206C Hardener. Slow Hardener is used when an extended working and cure time is needed, or to provide adequate working time at higher temperatures.
When an exceptionally clear, moisture-resistant, natural wood or clear carbon fiber finish is desired. Cures clear and colourless.
For when an exceptionally clear, moisture-resistant, natural wood, or a clear carbon fiber finish is desired.
Designed for convenient and accurate dispensing of West resin and hardeners.
Epoxy thickened with Microfibers has good gap-filling qualities while retaining excellent wetting, and penetrating capability.
Thickening for maximum physical properties for hardware bonding and other applications requiring a strong interface between dissimilar materials.
West's most versatile filler; creates a strong general purpose adhesive with a smooth texture. Excellent gap filling properties.
Creates a low density fairing or surfacing compound with good load bearing strength. Sands easily and can be used in light structural applications.
Proudly Serving Canada for over 25 years
The Binnacle 1065 Purcells Cove Rd. Halifax, NS, B3N 1R2