Buy Raymarine EV-400 Large Sail Autopilot Kit in Canada Binnacle.com

Raymarine T70161 EV-400 Large Sail Autopilot Kit

The Raymarine Autopilot Kit EV-400 is designed for large sailing vessels, with a maximum displacement of up to 44,000 pounds.

The EV-400 kit requires the use of Type 2 or Type 3 Linear Drive, purchased separately.

Cruise - An Evolution Autopilot will take command

No fuss, easy to install and robust - the EV400 Evolution Sail Autopilot Kit combines Raymarine's autopilot expertise, FLIR Systems' R&D, and advanced aerospace guidance technology to create Evolution Ai control algorithms that deliver a new level of accurate autopilot control.

Key Features:

Automagic^TM - No lengthy calibration procedures to perform. No compass calibration required. Plug and play connections
Easy to install - Freedom from the restrictions of conventional heading sensors. EV sensor core can be installed above or below deck. Install upside-down or off the vessel's centre line.
Aerospace technology - 9-axis precision monitoring of pitch, roll, yaw and heading
Fuel efficient - Evolution autopilots steer so accurately they will save fuel and get you to your destination faster

SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.

Engineered for simplicity, Evolution AI Autopilots eliminate the need for complicated setup and calibration.

Once Evolution is installed, getting started is as easy as switching the autopilot on.

Thanks to the intelligent EV sensor core, the autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments.

This innovative breakthrough in autopilot intelligence enables Evolution autopilots to perceive their environment and then instantly calculate and evolve steering commands to maximize performance.

The result is precise and confident course keeping, regardless of vessel speed or sea conditions.

EV-400 Sail Pack Includes:

EV-1 Sensor Core
ACU-400 Actuator Control Unit
p70 Control Head
Evolution Cabling Kit

Features:

EV-1 Sensor Core
- Designed for Evolution mechanical and hydraulic autopilot systems
- SeaTalk ^ng Networking
  - Enables a single cable connection for power and data to the Evolution ACU and extended SeaTalk ^ng and NMEA 2000 Networks
ACU-400
- Delivers reliable autopilot drive power
- Provides power to the SeaTalk ^ng bus
- Includes Rudder Reference Indicator M81105
- Connections:
  - Rudder reference sensor
  - Sleep Switch
  - Power
  - Drive Motor
  - Drive clutch
  - Ground
  - Digital Input / Output (DIO)
p70s Autopilot Control Head (Sail)
- Push-button operation controller designed primarily for sailboats
- Advanced LED backlighting = low power consumption, vibrant color and contrast
- Wide horizontal, vertical angles ensure the display can be seen clearly from acute positions
- Features Lighthouse user interface and start-up wizard to configure quickly and easily
Evolution Cabling Kit - Kit contains:
- (1) SeaTalk ^ng Power Cable (0.4m)
- (1) SeaTalk ^ng Backbone Cable (5m)
- (1) SeaTalk ^ng Spur Cable (0.4m)
- (1) SeaTalk ^ng 5-way Connector Block
- (2) SeaTalk ^ng T-piece Connectors
- (2) SeaTalk ^ng Terminators

Specifications:

EV-1 Sensor Core
Nominal Supply Voltage (volts DC)	12 Volt DC systems
Operating Voltage Range (volts DC)	10.8 – 15.6 Volts DC
Power Consumption	30 mA
SeaTalk ^ng LEN	1
Sensors	3-Axis digital
Data Connections	SeaTalk ^ng
Operating Temperature	-20ºC to +55ºC
Storage Temperature	-30ºC to +70ºC
Relative Humidity	max 93%
Waterproof Rating	IPX 6
Dimensions	140mm Diameter, 35mm Depth (incl. mounting enclosure), 95mm Depth (incl. wall bracket)
Weight	0.29 kg (0.64 lbs)
EMC Compliance	Europe: 2004/108/EC, Australia and New Zealand
ACU-400
Drive Current Output	Max continuous 30 Amp
Drive Clutch Output	Up to 4.0 Amp continuous
Nominal Supply Voltage	12 or 24 Volts DC
Operating Voltage Range	10.8 to 31.2 Volts DC
Power Consumption (standby) main power supply	300 mA (12/24 Volts DC)
Power Consumption (standby) SeaTalk ^ng power supply	20 mA (12 Volts DC)
SeaTalk ^ng LEN	1
SeaTalk ^ng Power out	3 Amp at 12 Volts DC
Data Connections	SeaTalk ^ng
Operating Temperature	-20ºC to +55ºC
Storage Temperature	-30ºC to +70ºC
Relative Humidity	max 93%
Waterproof Rating	Drip Resistant
Dimensions W x H x D	285 mm x 211.5 mm x 64.5 mm (11.2" x 8.3" x 2.5")
Weight	2.2 kg (4.84 lbs)
Conformance	Europe: 2004/108/EC Australia and New Zealand: C-Tick, Level 2

p70 Autopilot Control Head
Nominal voltage (volts DC)	12 Volt DC
Voltage range (volts DC)	9 – 16 Volts DC
Screen Size	3.5" TFT LCD 320 x 240 pixels
Colors	16 bit color (64K colors)
LCD Brightness	700 cd/min²
Power Consumption	69 mA no lighting; 134 mA 100% illumination
Connections	SeaTalk ^ng (x2) and SeaTalk1 Compatible
Operating Temperature	-25ºC to +55ºC
Storage Temperature	-30ºC to +70ºC
Relative Humidity	93% max
Waterproofing	IPX 6
Conformance	Europe 2004 /108 /EC Australia and New Zealand C-Tick, Level 2