Perko 0162DP0WHT Fog Horn

Aluminum - white baked enamel finish - Nylon mouth piece.

Perko 0271DP0CHR Inset Hinge 2-3/4" x 2-1/2"

3/8" Inset.

Perko 0272DP0CHR Flush Hinge 2-3/4" x 1-7/8"

Semi-concealed for overlay doors.

Perko 0330DP2CHR Locker Vent 3-1/4"

3-1/4" Outside diameter. Chrome-plated brass.

Perko 0339DP0CHR Clam Shell Ventilator

Large clamshell vent with a 4" x 3-3/4" base. The ventilation opening is 1-5/8" high by 2-1/2" wide.

Perko 0561DP4CHR Gas Tank Vent with Swivel Elbow

The design allows the elbow to be rotated to any position. For 5/8" diameter vent hose and a maximum hull thickness of 1".

Perko 0575DP0CHR Flush Lifting Pull

Chrome-plated bronze with 2-5/8" x 2" dimensions.

Perko 0610DP0CHR Chrome Zinc Utility Hook 1-3/8

Width Base: 1-1/8" , Projection: 1-3/8" , Screw Size: #6

Perko 0829DP0PLB Round Type Rowlock

Manganese bronze with 1/2" diameter Shank. The Horn has a 2-1/4" inside diameter.

Perko 0833DP0PLB Rowlock Socket Edge Mount

Manganese bronze and Edge Mounting. For use with Rowlocks having a 1/2" nominal Shank size.

Perko 0841DP0CHR Flush Pull Ring

Dimensions of 1-3/4" x 1-3/8". Chrome-plated zinc alloy.

Perko 1051DP0CHR Flush Ring Catch

Perko 1074DP2WHT LED Utility Light White with Snap on Front Cover

Flush LED White utility light with a snap-on front cover that conceals mounting screws. Supplied with 7" of pigtail wires.

Perko 1181DP0CHR Combination Masthead / White All-Round Light

Fold-down Combination Masthead/White All-Round Light - Horizontal mount.

Perko 1198DP1CHR Hasp 2" Chrome-Plated Zinc Alloy

Closed length is 2".

Perko 1198DP3CHR Hasp 3-3/4" Chrome-Plated Zinc Alloy

Length closed is 3-3/4".

Perko 1220DP0CHR Flush Lifting Handle

The Face Plate is 3" x 2-1/4" in size.

Perko 1232DPCHR Flush Ring Pulls

Chrome-plated zinc alloy. Two sizes are available with an outside diameter of 1-5/8" or 2".

Perko 1267DP0CHR Round Type Rowlock Horns - Pair

Chrome-plated zinc alloy. 2" diameter inside dimension.

Perko 1312DP0CHR Cowl Ventilator

It provides a cowl opening of 8 square inches and makes connecting 3" blower hose easy.

Perko Butt Hinge 3" x 3" Pair

Chrome-plated zinc

Perko Chrome Flush Latch with Box Strike

Chrome Plated Zinc Alloy. Dimensions Case : 2-1/8" x 1-3/4". Regular Bevel with Box Strike

Perko Fuel Fill Locking Insert

Dual purpose key opens fill cap & locking insert. Fits most PERKO vented fills

Perko Gas Fill for 1-1/2" Hose with Vent

Integral Tank Vent with Flame Arrestor and Anti Surge Valve

Perko Sliding Window Stop

Dimensions Mounting Plate Inches: 1-7/8" x 3/4". Length Stopping Plate Inches: 1-1/2". Screw Size: #8. Polymer Cover on Stopping Plate. Chrome Plated Zinc Alloy

Perko 0281DPALNS 112-1/2 Degree Lenses for Side Lights

Replacement lenses for the Perko 0963 and 0915 Horizontal mount Bicolour Side Lights.

Perko 1199DPCHR Cabin Door Hooks

Hook lengths from 1-3/4" to 4". Chrome-plated zinc alloy.

Perko 1271DP0CHR Transom or Locker Ventilator

Chrome-plated zinc alloy body with an anodized aluminum expanded mesh screen.

Perko 0504DP0CHR Water Outlet Fitting

For use with an on-board wash down system. It has a standard Male Hose Connector on the deck side and a 1/2" NPT Female rear inlet. Watertight black plastic cap and stainless bead chain.

Perko 0826DP0CHR Adjustable Deck Plate Key

Adjustable Deck Plate Key fits deck plates up to 8" in diameter. Chrome-plated zinc alloy with hardened steel pins.

Perko 1313DP0CHR Gas Fill for 1-1/2" Hose

Chrome-plated zinc alloy gas deck fill with a 3-1/8" diameter black polymer flange.

Perko Transom or Locker Vent Grill 7 x 2-1/2 Chrome

Dimensions: 7" x 2-1/2". Screw Size: #8

Perko 1-1/4 Pipe to 1-1/4 Hose Adapter 0076DP7PLB

Perko 0076DP7PLB Bronze 1-1/4 inch Pipe to 1-1/4 inch Hose Adapter. Cast Bronze, Cast Hex for Easier Installation, Precision Machined Hose Barb.

Perko Fuel & Water Fills for 1-1/2" Hose

Perko gas, diesel & water Deck Fill's for 1-1/2" hose.

Perko Intake Water Strainer 1/2"

1/2" Raw Water Strainer designed for easy installation and cleaning.

Perko 0063DP8PLB Pipe to Hose Adapter 1-1/2" - 90 Degree Curved

90 Degree curved cast bronze 1-1/2" Pipe To Hose Adapter with Hex for easier installation.