Harken Offshore Cam-Matic Wedge Kit

Fits Harken Offshore Cam-Matic 280 cam cleat and may improve the angle of your cams.

Harken Reflex Unit 2 Forked Tack Swivel Terminal

Quick-release modular T-fitting allows single drive unit to handle multiple sails.

Harken 173 Small Boat Low Beam Endstops

When end controls are not used, add endstops to absorb shock loads.

Harken 201 38 mm Low-Profile Standard Eyestrap Pair

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads.

Harken 2156 40mm Pivoting Lead Block with 150 Cam Cleat

A pivoting lead block with the stronger 150 Cam-Matic cleat is used for halyard controls on larger keelboats and as "head knockers" on dinghies for sheeting directly from the boom.

Harken 2676 57mm Fiddle Ratchet with 150 Cam & Becket

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.

Harken 298 Wire Fairlead for 150/365 Cam Cleat

Harken 6275 60mm Aluminum Element Triple Block with Swivel Becket & Cam Cleat

Element Blocks are both contemporary and robust. The design of the element block combines the minimum amount of metal required to protect the sheave along with a proven bearing.

Harken Reflex Unit 1 Tack Swivel Terminal

Quick-release modular T-fitting allows single drive unit to handle multiple sails.

Harken 174 Small Boat High Beam Endstops

When end controls are not used, add endstops to absorb shock loads.

Harken 2680 75mm Carbo Ratchamatic Block with Swivel

The Carbo Ratchamatic® is a load-sensing ratchet block with a 15:1 holding power that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase.

Harken 282 52 mm Offshore Eyestrap Pair

Fits Harken Offshore Cam Cleat 280.

Harken 6290 80mm Aluminum Element Block with Swivel Head

Element Blocks are both contemporary and robust. The design of the element block combines the minimum amount of metal required to protect the sheave along with a proven bearing.

Harken 7312.21 3/4 Unit 2 Long Link Plate with 3/4" Toggle

Designed to be cut to length, to allow the furling drum to be raised to a specific height above deck, depending on deck layout or to clear obstructions such as anchors.

Harken 7401 40mm Stanchion Mount Block

To lead the furling line aft to the cockpit.

Harken 073 32 mm Eyestrap Pair

Eyestraps are useful accessories. They form light-duty mounting bases for blocks, serve as lash-down points, and can be used for fairleads.

Harken 2694 75mm Fiddle Ratchet Block Swivel

This switchable 75mm Ratchet block provides up to 15:1 holding power and provides precise on/off control with accessible, easy-to-operate switches on both sides of the block. .

Harken 2722 Small Boat Low-Beam Trim Caps Pair

When end control assemblies are used, Trim Caps finish track ends. Fits 22 mm Small Boat track 2720, 2751, and 373.

Harken 435 Small Boat Standard Furling System

For Monohull Dinghies up to 20' and Multihull Dinghies up to 18'

Harken 6291 80mm Aluminum Element Block with Swivel Head & Becket

Element Blocks are both contemporary and robust. The design of the element block combines the minimum amount of metal required to protect the sheave along with a proven bearing.

Harken Bullseye with Swivel Base & 200 Cam-Matic

Harken 2695 75mm Fiddle Ratchet Block Swivel & Becket

The 2695 75mm ratchet block has an On/Off switch that allows the ratchet to be turned off in light air to trim and ease lines more easily.

Harken 2723 Small Boat High-Beam Trim Caps Pair

When end control assemblies are used, trim caps finish track ends. Use with track 2721, 2725, 374

Harken 6292 80mm Aluminum Element Fiddle Block with Swivel Head

Element Blocks are both contemporary and robust. The design of the element block combines the minimum amount of metal required to protect the sheave along with a proven bearing.

Harken 7311.20 5/8 Toggle Unit 1 Stud Jaw with 5/8" Clevis

Replacement lower turnbuckle Stud / Jaw Toggle Assembly with 5/8" LH thread stud and clevis pin.

Harken 2629 57mm Triple Carbo Ratchamatic Block with 150 Cam-Matic

By right-angle reeving the 2603 57mm Double with Becket, a 5:1 purchase is created. See the diagram below.

Harken 263 Small Boat Heavy Duty Low Beam Track Endstops Pair

When end controls are not used, add endstops to absorb shock loads.

Harken 2696 75mm Carbo Fiddle Ratchet Block with Swivel & Cam Cleat

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.

Harken 6293 80mm Aluminum Element Fiddle Block Swivel & Becket

Contemporary and robust. The design of the Element block combines the minimum amount of metal required to protect the sheave with a proven bearing.

Harken 7312.21 5/8 Unit 2 Long Link Plate with 5/8" Toggle

Designed to be cut to length, to allow the furling drum to be raised to a specific height above deck, depending on deck layout or to clear obstructions such as anchors.

Harken 264 Small Boat Heavy Duty Low Beam Track Endstops Pair

When end controls are not used, add endstops to absorb shock loads.

Harken 2697 75mm Fiddle Ratchet Block with Swivel Becket & Cam Cleat

Carbo Ratchets allow sailors to hand-hold loaded lines and offer balance between holding power and controlled easing.

Harken 6294 80mm Aluminum Element Single Footblock

They are secured with 10mm-diameter bolts and used to change direction of line up to 5/8" in diameter. They are great for routing a cabin top mainsheet, Traveler control, or any number of applications.

Harken 7311.21 5/8 Unit 1 Long Link Plate with 5/8" Toggle

This is used for a Unit 1 size Harken MKIV 7411.10 or MKIV Ocean 7511.10 Furler and is designed to be cut to length. It allows the furling drum to be raised to a specific height above the deck, depending on the deck layout, or to clear obstructions such as anchors.

Harken 176 Small Boat Delrin Ball Bearings 6 mm 21 Pack

Replacement balls for Small Boat Low-Load cars. Fits 2726, 2728, 2730, 2732 and 2753 cars.

Harken 6296 80mm Aluminum Element Double Block with Swivel Head

With a 1/2" shackle pin, a 5/8" maximum line size, and a 6,064-pound maximum working load. This Element Double Block is both contemporary and robust.