Spinlock PXR 0206/SW - Swivel Cleat 2 - 6mm

Swivel base new PXR Cam Cleat designed for 360 degee precision control of high performance lines 2-6mm

Spinlock XAS Single Power Rope Clutch XAS0612/1

Single rope clutch for 1/4" to 1/2" rope. Perfect for racing boats up to 27' and cruisers up to 35'.

Spinlock Ceramic Base for XTS and XCS Clutches X-BASEC

Upgrading your Spinlock Bases and Cams to ceramics will help resist the polishing and wear caused by high tech rope fibres such as Aramid, Technora, Codura or Vectran and allows for faster engagement on to loaded line.

Spinlock Double Elasticated Performance Safety Line with 3 Hooks

Double elasticated performance safety tether with three forged Safety Clips. Compliant with section 5.02.2 of the World Sailing Offshore Special Regulations.

Spinlock DW-UMLE Elite Firing Head

For use with Spinlock Pro-Sensor and Spinlock LITE+ manufactured starting in October 2018, which contain a Grey and Black UML Elite Firing Cap.

Spinlock PXR 0810 Powercleat with Block Adaptor 8-10mm

Hole centres allow direct replacement of traditional cam cleats

Spinlock XAS Double Power Rope Clutch XAS0612/2

Double clutch for 6 to 12mm line. (1/4" to 1/2") Loads up to 575 kg (1270 lbs). Suitable for racing boats up to 27' and cruising yachts up to 35 feet.

Spinlock Ceramic Cam for 0610 XTS and XCS Clutches CAM-0610C

Upgrading your Spinlock Bases and Cams to ceramics will help resist the polishing and wear caused by high tech rope fibres such as Aramid, Technora, Codura or Vectran and allows for faster engagement on to loaded line.

Spinlock Double Elasticated Performance Safety Tether with 2 Clips & Loop

Double elasticated performance safety tether with two forged Safety Clips & a "Cow Hitch" chest attachment. Up to 50% lighter and more compact than conventional safety tethers. "Dry Coated" to reduce water absorption & stay lighter for longer. Lightweight clips with wide opening gate and overload indicator.

Spinlock Essentials Chest Pack DW-PCC

Chest Pack for all your sailing essentials. Fits to any belt with "hook and loop" and three attachment points for fitting to Deckvests . Lightly padded with structured two way zip for easy access.

Spinlock PXR Single 2-6mm Powercleat

The PXR has lighter settings for continuously trimmed sheets, traveller controls, vangs and similar controls.

Spinlock XAS Triple Power Rope Clutch XAS0612/3

Triple clutch for lines 1/4"-1/2" (6-12 mm) . Loads up to 575 kg (1270 lbs). Suitable for racing yachts up to 27 feet and cruisers up to 35 feet.

Spinlock Ceramic Cam for 0814 XTS and XCS Clutches CAM-0814C

Upgrading your Spinlock Bases and Cams to ceramics will help resist the polishing and wear caused by high tech rope fibres such as Aramid, Technora, Codura or Vectran and allows for faster engagement on to loaded line.

Spinlock Deckware Belt Pack DW-PCB

For all your sailing essentials. Fits to any Deckvest or belt.

Spinlock PXR Single 8-10mm Powercleat

The PXR has lighter settings for continuously trimmed sheets, traveller controls, vangs and similar controls.

Spinlock Single Elasticated Performance Safety Line with 2 Clips

Single elasticated performance safety tether with two forged Safety Clips, one for the boat & one for chest attachment. Up to 50% lighter than conventional safety lines with "Dry Coated" webbing that reduces water absorption. Two easy to use lightweight forged clips with wide opening gate. Overload indicator.

Spinlock XAS Quad Power Rope Clutch XAS0612/4

for 6 to 12mm line. (1/4" to 1/2") Loads up to 575 kg (1270 lbs). Suitable for racing boats up to 27' and cruising yachts up to 35 feet.

Spinlock Deckvest 6D Inflatable Lifejacket

Following feedback and review the Spinlock design team have worked hard to develop yet again the latest in lifejacket technology and a step-change in product development.

Spinlock PXR Vertical Pivot Cleat

The PXR0206/VP allows single line control to either side of the boat from its central mast or boom installation. Ideal for mast base mount for catamaran downhauls

Spinlock Single Elasticated Performance Safety Tether with Hook & Loop DW-STR/2LE/C

A Single tether up to 50% lighter and more compact than conventional safety lines. "Dry Coated" to reduce water absorption & stay lighter longer.

Spinlock XAS-BASE0612 XAS & XA Clutch Base Module (6-12 mm)

Replacement or upgrade base for XA or XAS Clutches to give optimized holding on small diameter lines.

Spinlock Deckvest 6D 170N Pro Sensor Inflatable Lifejacket with HRS

Spinlock EJB Repair Kit for Tiller Extension

EJB retaining clip and EJB replacement joint

Spinlock Handle Labels for Clutches

Spinlock Handle Labels For Clutches. For XAS, XA and XT.

Spinlock PXR0810/SW Cam Cleat Swivel Base 8 - 10 mm

Swivel base PXR Cam Cleat designed for 360° precision control of high-performance lines 8 - 10 mm in diameter.

Spinlock UML Auto Firing Head DW-UML5

Replacement firing "bobbin" mechanism, for Spinlock Pro Sensor and LITE Deckvests built prior to October 2018.

Spinlock Deckvest VITO Offshore 170N Hammar Hydrostatic Inflatable Lifejacket

Using the latest Spinlock inflatable lifejacket harness technology, the Deckvest VITO is based on design work for the 2017 - 2018 Volvo Ocean Race. All teams wore the same inflatable lifejacket harness developed in collaboration with a group of Volvo offshore sailors. A key aspect of the new design was a lifejacket that sailors wanted to wear more often and with numerous custom features.

Spinlock DW-RAK Deckvest Inflatable Re-Arm Kit 33g

Designed for the Spinlock Deckvest Pro-Sensor and Deckvest LITE+ manufactured by Spinlock up to the end of August 2018 with the Black UML "Bobbin" and Green button.

Spinlock Replacement Cam XA and XAS Powerclutch

Standard replacement cam - for Spinlock XAS and XA powerclutches.

Spinlock SUA/1 Single Stopper 6-10mm (1/4"-3/8")

Cam jammers of this type may need to be engaged and released by taking to a winch (it is not a clutch) - but it is a popular and inexpensive small boat solution.

Spinlock XTS Single Power Rope Clutch 6mm - 10mm

For 1/4"-3/8" (6-10 mm) lines and optimized for 5/16"-3/8" (8-10 mm) lines. Strongly recommended for high strength small diameter line.

Spinlock Deckvest VITO with HRS Offshore 170N Hammar Hydrostatic Inflatable Lifejacket

Includes a revolutionary Harness Release System. The ability to quickly release a safety tether can be lifesaving in certain situations. The Spinlock HRS is concealed, yet easy to find and simple to operate, an industry first in design, that gives a consistent release - opening the harness connection point and releasing the user.

Spinlock DW-LMN Lume-on Bladder Illumination Lights

2 flashing LED Lights (pair) illuminate the inflated lifejacket bladder to increase visibility and aid location

Spinlock DW-RAK/E170 Elite Re-Arm Kit for Pro-Sensor & LITE+

For use with Spinlock 5D (2018 onwards) & Deckvest 6D 170N models and the Spinlock LITE+ manufactured starting October 2018, which contain the United Moulders Ltd. (UML) Grey/Black Elite Firing Cap.

Spinlock SUA/2 Double Stopper 6-10mm

Cam jammers of this type may need to be engaged and released by taking to a winch (it is not a clutch) - but it is a popular and inexpensive small boat solution.

Spinlock XAS Clutch Replacement Handle

Replacement handle for the Spinlock XAS model rope clutch.