SCHAEFER 505-80 SERIES 5 SS DOUBLE ORGANIZER

Schaefer 62-020-02 1-1/16" Sheave

This Series 2 Delrin sheave has a 1-1/6" outside diameter and a 5/16" bore with a 7/16" width.

Schaefer 62-030-02 Delrin Sheave 1-7/16"

Maximum line diameter of 1/2", with an outside diameter of 1-7/16" and a 3/8" bore.

Schaefer 62-065B 2-3/8" Sheave with Bushing

Replacement Schaefer Series 7 Delrin with a 1/2" CJ composite bushing. Outside diameter is 2-3/8", or 60 mm, with a 13/16" (21 mm) width.

SCHAEFER 74-46 SCREW PIN STOP

Schaefer 80-55 Keel Boat Lower Pintle 1/2" Pin x 1-1/2" Width

Used as a Lower Pintle on small keelboats up to 20' in length. Designed to be used in combination with a Schaefer 80-56 Upper Pintle and Schaefer 81-43 1/2" diameter Gudgeons. For rudders 1-1/2" wide.

Schaefer 80-56 Keel Boat Upper Pintle 1/2" Pin x 1-1/2" Width

Used as an Upper Pintle on small keelboats up to 20' in length. Designed to be used in combination with a Schaefer 80-55 Lower Pintle and Schaefer 81-43 1/2" diameter Gudgeons. For rudders 1-1/2" wide.

Schaefer 505-05 Single Stainless Block with Swivel Head

Stainless steel cheeks and plain bearing 2" Delrin sheave. Recommended for halyard and genoa leads on boats up to 28' in length overall.

Schaefer 704-05 Single Aluminum Block

Single block with 60 mm diameter sheave and black hard-coat anodized aluminum cheeks for medium-sized cruising and racing yachts.

Schaefer 505-15 Single Stainless Steel Block with Becket

The 505-15 single has stainless cheeks with a 2" diameter sheave and a universal swivel head. It is recommended for small to medium size cruising and racing boats up to 28' LOA.

Schaefer 704-11 Cheek Block Aluminum with Flat Base

Use on spars or deck to lead sheets, halyards, reefing gear up to 1/2" in diameter.

Schaefer 34-49 Halyard Exit Plate Curved

Stamped and formed to provide a smooth halyard lead and finished look to the mast and boom slots.

Schaefer 704-92 Stand Up Spring Block for 1-1/4" T-Track

It is recommended for boats up to 33' length overall, with a sail area up to 520 sq. ft., with a displacement of less than 12,000 lbs.

Schaefer 73-37 Jiffy Reef Block with Bail - Lined for 1" T-Track

Ideal for most boats up to 30' length overall, using 1" T Track. Allows the "dead end" of the reefing line to be tied or spliced and led around the boom and through your clew reefing grommet. Ideal for most boats up to 30' length overall, using 1" T Track.

Schaefer 505-45 Stainless Fiddle Block

Stainless fiddle block with a 2" diameter sheave offers small to medium-sized cruising and racing yachts an extremely high strength/weight ratio. They are recommended for boats up to approximately 28' in length overall.

Schaefer 705-28 Series 7 Stainless Double Cheek Block

Stainless steel flat base double cheek block with 2-3/8" diameter sheaves. Maximum line diameter is 1/2".

Schaefer 505-55 Stainless Fiddle Block with Becket

For boats up to 28' in length. Use in combination with other 5 Series blocks for a variety of applications. Works with the 505-45 for a 4:1 purchase.

Schaefer 81-43 Keel Boat Gudgeon 1/2" Pin

Gudgeon for small keelboats up to 20'. Accepts 1/2" diameter pins.

Schaefer 705-05 Single Stainless Steel Block

Schaefer 504-05 Single Aluminum Block

2" Delrin sheave with hardcoat anodized aluminum cheeks. Recommended for boats up to 28' LOA.

Schaefer HH Handi Hanger

Fits 7/8" or 1" diameter tubing, and PVC coated lifelines. Remove the back section to mount on a vertical bulkhead.

Schaefer 504-62 Stand-Up Swivel Block with Aluminum Cheeks

2" Diameter Sheave accepts line up to 7/16" in diameter.

Schaefer 62-051 2" Delrin Sheave White

Outside diameter 2" with a 1/2" bore. 5/8" width. Maximum 1/2" line diameter.

Schaefer 504-11 Aluminum Cheek Block Flat Base

Flat base with single 2" diameter UV resistant Delrin sheave. 1,750 pound Safe Working Load.

Schaefer 62-030-01 Delrin Sheave 2-1/4"

2-1/4" diameter UV resistant Delrin replacement sheave with a 3/8" bore.

Schaefer Snapfurl CF-500 Furling for Boats 16 to 24 ft.

SnapFurl uses the snap over-the-headstay, interlocking extrusion system. It requires no headstay modifications. Schaefer quality engineering utilizes Torlon bearings allowing easy reefing or furling at any time.

Schaefer Snapfurl CF-700 Furling for Boats 24' to 28'

A snap over-the-headstay, interlocking extrusion system with no headstay modifications. Schaefer quality engineering utilizes Torlon bearings, machined aluminum torque tube and drum plates.

Schaefer 504-28 Double Aluminum Cheek Block Flat Base

Ideal for spars or the deck to lead sheets, halyards, reefing gear and any control lines requiring a smooth lead. Max Line 7/16"

Schaefer 55-60 Cheek Pad Adaptor For Spars - 5 Series

Allows mounting of 5 Series flat base Cheek Blocks to spar sections ranging from 2-1/2" to 6" in diameter.

Schaefer 62-019 2-3/8" Sheave

Replacement Schaefer Series 7 Delrin sheave. Outside diameter is 2-3/8", or 60 mm. Bore is 7/16" (11 mm) with a 13/16" (21 mm) width.

Schaefer 62-019 2-3/8" Sheave Black

Replacement Schaefer Series 7 Delrin 1/2" bore sheave. Outside diameter is 2-3/8", or 60 mm, with a 13/16" (21 mm) width.

AH-100 Anchor Hanger for Danforth Style Anchors

Pulpit mount anchor hanger. Works with Danforth style fluke anchors from 8 to 22 pounds in weight.

Schaefer 303-09 3 Series Aluminum Cheek Block Flat Base

Excellent for use on small cruisers, daysailors and high-performance racing dinghies. Maximum 7/16" line diameter.

Schaefer 03-30 Curved Base Single Cheek Block Stainless

It fits spar diameters up to 2" in diameter and provides a smooth running 1,000-pound safe working load.

Schaefer 62-031 1-7/16" Sheave

1-7/16" diameter sheave with a 5/16" bore. 17/32" wide. Maximum line diameter of 3/8".

Schaefer 34-46 Halyard Exit Plate - Max 1/2in Halyard

Exit Plate for halyards up to 1/2" diameter. Stamped and formed to provide a smooth halyard lead, and a finished look for mast and boom slots.