Hardware

Ronstan RF91 Guy Hook Through-Bolt

This through-bolt RF91 Guy Hook was used by LP and PS2000 on some C420s.

Ronstan RF92 Guy Hook Pad Mount

This screw-down RF92 Guy Hook was used by some C420 manufacturers.

RWO R4124 Trapeze Handle Discs Red & Green

Red and green trapeze handle discs help to locate the trapeze ring.

RWO R4390 Stay Adjuster 5mm Pins

Allows wire rigging adjustment in 8mm increments for small catamarans, monohull dinghies, and single-handed dinghies.

RWO R4410 Stay Adjuster 6mm Pins

Stainless steel in-line rigging adjuster with 6 mm clevis pins and rings.

Zim C420 Centerboard Gasket Set

Strip gasket set for centreboard slot, laminated woven polyester on a rigid nylon backing.

Zim C420 Foil Bag

Blade bag for rigged rudder and tiller with an external pocket for sheets, etc.

Zim C420 Hiking Strap (Each)

C420 hiking strap, black webbing with a pad underneath for comfort when hiking hard.

Zim C420 Main Halyard Ring

Zim Nonskid Grey 2 x 3" x 5'

Two sections of 5' long by 3" wide grey non-skid originally supplied on Zim C420s.

Sherman Johnson Shroud Adjuster Calibrated with 1/4 in Pin - Zim 420

Used as OEM equipment on Zim C420's, the calibrated adjuster will accept the Zim 1/4" Spinnaker Guy Roll Pin.

Zim Foam Cover for Shroud Adjuster

These covers prevent jib sheets from catching on pins and can also be used on the jib halyard shackle.

RWO R8430 Hook 5mm Open

5 mm diameter open hook often used as a dinghy topping lift hook.

Andersen RA554131 Super Mini Self Bailer Inside Mount

The Super Mini is original equipment on Zim C420's. Size of opening 250mm² (0.387 in²)

Andersen RA554132 Super Medium Self Bailer Inside Mount

Original equipment on LP C420's. Size of opening is 350mm² (0.543in²).

Zim Spinnaker Guy Roll Pin 1/4" Pin

It fits Zim and Vanguard shroud adjusters that utilize a 1/4" diameter lower clevis pin.

Optiparts EX1354 Nylon Trapeze Handle

Nylon trapese handle with hole for 4mm rope to attach to the halyard

Zim C420 CFJ Tapered Spinnaker Pole

Tapered spinnaker pole for C420 or CFJ

RWO R4392 Shroud Spini Roller with 5 mm Pin

Replaces the shroud adjuster's lower clevis pin and allows the spinnaker guy to run under the roller pin.

Hitch Pin - Extra Large Stainless Steel

Hitch pin clip used to secure a wheel on a Seitech dolly. Fits thru dolly axle.

Clamcleat CL253AN Trapeze & Vang Cleat Hard Anodized

Hard anodized, the Trapeze Cleat found on most world-class dinghies.

Ronstan RF17 Trapeze Ring Extra Large Loop with Pulley

Oversize stainless steel loop with 3/4" ball bearing block for a 2:1 trapeze system.

Beckson DP10-B Drain Plug Screw Type 1" Black

Used by Zim, on the Zim C420 and our ILCA hulls.

RWO Rope Stopper Balls - Pair

Three sizes of Stopper Balls or Parrel Beads as they are also known can be used in many applications. Available in different colors and sized for 4 mm, 6 mm and 8 mm diameter line. Sold as pairs.

Ronstan RF2358 Deck Eye Stainless Steel Liner 16 mm

A good option for big and small boat use.