Rope Clutches

Antal 507.112 V-GRIP Rope Clutch Single for 10-14 mm Line

The curved base V-Cam increases the bearing surface preventing the load from being concentrated at a critical point. Line retrieval can be achieved with the lever closed stopping automatically in the new position with no slippage.

Antal 507.132 V-GRIP Rope Clutch Triple for 10-14 mm Line

The curved base V-Cam increases the bearing surface preventing the load from being concentrated at a critical point. Line retrieval can be achieved with the lever closed stopping automatically in the new position with no slippage.

Spinlock XAS-KIT XAS Clutch Service Kit

Complete service kit for XAS clutches.

Spinlock XAS0408/2 Double Rope Clutch

Double clutch for 4 to 8mm line. (5/32" - 5/16") Loads up to 400 kg (880 lbs).

Lewmar DC1 Rope Clutches Low Load

Lewmar's unique rope gripping dominoes help prevent rope fray. The DC1 is designed for mid-size boats and will handle high load applications, like halyards on boats up to approximately 32 feet.

Spinlock X-BASEC Ceramic Base XTS/XCS

Upgrading your Spinlock Bases and Cams to ceramics will help resist the polishing and wear caused by high tech rope fibres such as Aramid, Technora, Codura or Vectran and allows for faster engagement on to loaded line.

Spinlock XAS0612/1 Single Rope Clutch

Single rope clutch for 1/4" to 1/2" rope. Perfect for racing boats up to 27' and cruisers up to 35'.

Antal 549.112 V-Cam 814 Rope Clutch Single 3/8-1/2" (10-12 mm)

The curved base V-Cam increases the bearing surface preventing the load from being concentrated at a critical point. Line retrieval can be achieved with the lever closed stopping automatically in the new position with no slippage.

Spinlock CAM-0610C Ceramic Cam Module XTS/XCS 6-10 mm

Upgrading your Spinlock Bases and Cams to ceramics will help resist the polishing and wear caused by high tech rope fibres such as Aramid, Technora, Codura or Vectran and allows for faster engagement on to loaded line.

Spinlock XAS0612/2 Double Rope Clutch

Double clutch for 6 to 12mm line. (1/4" to 1/2") Loads up to 575 kg (1270 lbs). Suitable for racing boats up to 27' and cruising yachts up to 35 feet.

Antal 549.122 V-Cam 814 Rope Clutch Double 3/8 - 1/2" (10-12 mm)

The curved base V-Cam increases the bearing surface preventing the load from being concentrated at a critical point. Line retrieval can be achieved with the lever closed stopping automatically in the new position with no slippage.

Spinlock CAM-0814C Ceramic Cam Module XTS/XCS 8-14 mm

Upgrading your Spinlock XTS with Ceramic Bases and Cams to help resist the polishing and wear caused by high-tech rope fibres such as Aramid, Technora, Codura or Vectran. They allow for faster engagement on these loaded lines.

Spinlock XAS0612/3 Triple Rope Clutch

Triple clutch for lines 1/4"-1/2" (6-12 mm) . Loads up to 575 kg (1,270 lbs). Suitable for racing yachts up to 27 feet and cruisers up to 35 feet.

Antal 549.132 V-Cam 814 Rope Clutch Triple 3/8 - 1/2" (10-12 mm)

The curved base V-Cam increases the bearing surface preventing the load from being concentrated at a critical point. Line retrieval can be achieved with the lever closed stopping automatically in the new position with no slippage.

Lewmar DC2 Rope Clutches High Load

Single, Double and Triple high load clutches for rope diameters ranging from 8 mm (5/16") to 14 mm (9/16") in diameter.

Spinlock XAS-BASE0612 XAS & XA Clutch Base Module 6-12mm

Replacement or upgrade base for XA or XAS Clutches to give optimized holding on 1/4" to 1/2" diameter lines.

Spinlock XAS0612/4 Quad Rope Clutch

for 6 to 12mm line. (1/4" to 1/2") Loads up to 575 kg (1270 lbs). Suitable for racing boats up to 27' and cruising yachts up to 35 feet.

Spinlock CAM-XAS Cam Module XAS/XA

Replacement Cam for all Spinlock XAS Clutches. Compatible with any XAS Clutch.

Spinlock XAS0612/HP Port Side Mount XAS Clutch 6 mm - 12 mm

Side mounting is usually the neatest solution for spars, side decks and coamings. This horizontal mount rope clutch is for 1/4" to 1/2" diameter rope. Perfect for racing boats up to 27' and cruisers up to 35'.

Spinlock XAS-HDL Clutch Handle

Replacement handle for Spinlock XAS rope clutch.

Spinlock XAS0612/HS Starboard Side Mount XAS Clutch 6 mm - 12 mm

Horizontal Starboard side mount rope clutch for 1/4" to 1/2" rope. Perfect for racing boats up to 27' and cruisers up to 35'.

Spinlock X-LBL Handle Labels

Replacement Spinlock handle labels for identification. Suitable for XAS, XCS and XTS Rope Clutches.

Spinlock XTS0610/1 Single Rope Clutch 6 mm - 10mm

For 6-10mm diameter lines and optimized for 8-10mm lines and strongly recommended for high strength small diameter lines.

Spinlock XAS-SIDE Side Fairings

Replacement side fairings for XAS clutches.

Spinlock XTS0610/2 Double Rope Clutch 6mm - 10mm

For 1/4"-3/8" (6-10 mm) lines and optimized for 5/16"-3/8" (8-10 mm) lines. Strongly recommended for high strength small diameter line.

Spinlock XAS-SMNT Sidemount Kit for XA and XAS clutches

Kit for side mounting Spinlock XAS Clutches.

Spinlock XTS0610/3 Triple Rope Clutch 6mm - 10mm

For 1/4"-3/8" (6-10 mm) lines and optimized for 5/16"-3/8" (8-10 mm) lines. Strongly recommended for high strength small diameter line.

Spinlock CAM-0610 Cam Module 6-10 mm XTS XCS XT and XC

Replacement CAM for Spinlock XTS, XCS, XT and XC power clutches.

Spinlock XTX/B SoftGrip Rope Clutch Black

Three-size diameters featuring Spinlocks SoftGrip fabric rope holding technology to engage and hold a loaded line. Available for 8 mm, 10 mm or 12 mm diameter lines, these XTX clutches are very "kind" to the rope cover with a controlled and easy release.

Spinlock CAM-0814 Cam Module 8-14 mm XTS XCS XT and XC

Suitable for use with line diameters 8mm to 14mm (5/16" - 9/16") in diameter.

Spinlock XTS0814/1 Single Rope Clutch 8 mm - 14 mm

The XTS0814 Clutch is for lines 8mm to 14mm in diameter. It has a Maximum Working Load at a Maximum Line Diameter of up to 1,000kg.

Spinlock X-SIDE Side Fairings XT Clutch

Replacement side fairings for XT clutches only.

Spinlock XTS0814/2 Double Rope Clutch 8 mm - 14 mm

Double Spinlock XTS Rope Clutch for lines 8-14mm (5/16" - 9/16") in diameter. Handles loads up to 1000kg.

Spinlock XTS0814/3 Triple Rope Clutch 8 mm - 14 mm

Triple Spinlock XTS Rope Clutch for lines 8-14mm (5/16 - 9/16") in diameter. It has a Maximum Working Load of up to 1,000kg at a Maximum Line Diameter.

Spinlock XTS0814/4 Quad Rope Clutch 8 mm - 14 mm

The Spinlock XTS0814/4 Quad Rope Clutch is available for lines 8-14mm (5/16 - 9/16") in diameter. It has a Maximum Working Load of up to 1,000kg at a Maximum Line Diameter.

EasyLock Replacement Handle for EasyLock 1 Rope Clutch