This Item qualifies for Free Shipping on orders over $99! More Info...
Rust Bullet is a super-tough, premium grade, rust inhibitive coating that can be applied directly over rusted and clean surfaces providing permanent rust protection with phenomenal adhesion.
Free Ground shipping via Canada Post (UPS or Purolator for some locations) within Canada on most orders of $99 or more (pre-tax). Q. What do we mean by most orders? A. Some items are exempt from this offer and are indicated on the product page. Exempt items are usually bulky or heavy items such as buoys. Over 98% of the items on Binnacle.com qualify for the free shipping offer. To see what your shipping charge (if any) will be you can add the item(s) and quantities to the shopping cart and you will see a shipping cost calculator
Remote areas which require an "air stage" for delivery are exempt from Free Shipping offer. These are typically remote northern areas. Nunavut as well as many parts of the Yukon and NWT are exempt from free shipping
Cleans surfaces prior to caulking with Life-Calk, Life Seal, silicone or teak deck sealant.
One-part, non-flammable, resin-based primer for use on oily woods.
A slow evaporating thinner for brushing and rolling Epifanes Poly-urethane yacht coatings.
A slow evaporating thinner for brushing and rolling Epifanes Poly-urethane Yacht coatings.
Is used to remove mold release agents, wax, oil, grease and other surface contamination from the hulls of fiberglass boats. It`s also an effective brush cleaner.
A fast evaporating solvent which, when added to specified paint coatings, improves drying in cold climates and facilitates spray application.
A fast evaporating solvent for use with specific two-part polyurethane and epoxy products.
A slow evaporating solvent for use in specific two-part polyurethane and epoxy products.
333 Brushing Liquid is a slow drying solvent to ease brushing and facilitate the flow of specified paint coatings.
Two-part epoxy primer that is the recommended primer for use with two-part finishes, but can also be overcoated with any Interlux topside paint.
Recommended one part under coater for use with a single part topside finishes.
Bilgekote protects bilges, lockers and bulkheads against moisture penetration and wear and tear.
Fiberglass Surface Prep, YMA601 is the first step in a 2step system for removing mold release agents from gelcoat prior to application of antifouling paint.
Recommended above the waterline where a primer is needed to provide a smooth, fair surface for overcoating with a single part topside finish.
Primocon is an anticorrosive primer for underwater metal surfaces including hulls, running gear, and the lower units of outboards and InBoard/OutBoard`s.
Proudly Serving Canada for over 25 years
The Binnacle 1065 Purcells Cove Rd. Halifax, NS, B3N 1R2