Thinner for spray applications of Epifanes paints, varnishes and one-component primers. Also highly suited for degreasing wood and existing paint and varnish layers.
Solvent Wash is amazing at removing mould release agents, wax, oil and grease from hulls of bare fibreglass boats. It also removes wax and silicone contamination from painted hull surfaces that are being prepared for repainting.
Fiberglass Surface Prep, YMA601 is the first step in a 2step system for removing mold release agents from gelcoat prior to application of antifouling paint.
Primocon is an anticorrosive primer for underwater metal surfaces including hulls, running gear, and the lower units of outboards and InBoard/OutBoard`s.
Provides aerosol zinc spray protection for bare metals, including steel, stainless steel, cast iron, copper, bronze, galvanized steel, and lead. For repair and recharging of worn galvanizing.
Metal Blast is a cleaner and conditioner for metal that removes rust, grease, and contaminants allowing a superior bond to surfaces that have minimal or poor adhesive qualities.
A general purpose thinner. Many paints when stored for some time before use will increase in viscosity and should be thinned. Evaporates at a moderatre rate and is completely out of the paint film in several hours
Used to improve adhesion of Sikaflex adhesives and sealants on non-porous substrates such as metals, plastics, ceramic screen prints and painted surfaces.
We will answer your question and send you details within 24 hours.
Because our price on this item is lower than the manufacturer's Minimum Advertised Price, the manufacturer doesn't allow us to display our retail price until you place the item in your shopping cart.
Adding the item to your cart allows The Binnacle to show you our price; consistent with our goal of offering the lowest possible price on the widest selection of products.
Adding this product doesn't require you to purchase the item, and you can easily remove it from your cart if you decide not to buy it.
Your feedback has been forwarded to Binnacle.com. Your feedback will be reviewed and considered carefully. If your feedback requires a response, we expect to email you a reply within 24 hours (Monday to Friday).