What Is QuikAluminum?
QuikAluminum is an aluminum-reinforced, non-rusting epoxy putty formulated specifically to repair and rebuild aluminum components. Manufactured by Polymeric Systems Inc., the company that originated the epoxy putty stick format over 30 years ago, QuikAluminum is engineered with aluminum powder as a key ingredient to maximise bond strength and produce a cured compound that behaves like metal.
Once mixed, it forms a polymer compound that can be moulded into virtually any shape, pressed into cracks and holes, or built up over damaged surfaces. It cures to a light-grey metallic colour that blends naturally with aluminum substrates.
How to Use QuikAluminum
Using QuikAluminum is straightforward and requires no special tools or measuring equipment. Each stick contains pre-measured portions of activator and base material throughout its length, so the correct ratio is always maintained regardless of how much you cut off.
Follow these three steps for a reliable repair:
- Cut or twist off the required amount from the stick.
- Mix by kneading with gloved fingers until the compound reaches a uniform colour. If mixing feels stiff, warm the stick to room temperature or slightly above before starting.
- Apply to the prepared surface within 2 minutes of mixing. Force the compound into any cracks or holes and strike off excess material, preferably with a tool or fingers moistened with clean water.
Work Life and Cure Time
QuikAluminum has a work life of 5 to 7 minutes after mixing, giving you enough time to position and shape the compound before it begins to set. Functional cure occurs in 60 minutes, at which point the repair can be drilled, tapped, machined, ground, filed, and painted.
For best results, use damp fingers during mixing and application to achieve a smoother finish and easier handling. Remove any excess material before hardening begins to minimise cleanup.
Performance and Durability
QuikAluminum is formulated for industrial-strength performance. It achieves a Shore D hardness of 80 at full cure (24 hours) and a compressive strength of 8,000 psi (55 MPa). Lap shear tensile strength on aluminum reaches 500 lbs (3.5 MPa), and on steel it reaches 600 lbs (4.2 MPa).
The cured compound is resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions, and dilute acids and bases. It handles continuous temperatures from -40°C to 121°C and intermittent temperatures up to 149°C, making it suitable for demanding environments aboard boats and in engine compartments.
QuikAluminum contains no solvents or VOCs, is non-flammable, and releases no noxious fumes during application. Shrinkage is less than 1%, so the cured repair stays flush with the surrounding surface and will not pull away over time.
Marine and Boating Applications
QuikAluminum is a practical addition to any boat's repair kit, particularly for owners of aluminum vessels. It can seal leaks in aluminum hulls, repair tanks and tubing, and mend machine parts and castings. Its resistance to water and chemicals makes it well suited to the wet, corrosive conditions common in marine environments.
Beyond the boat itself, it handles a wide range of repair tasks:
- Seal leaks in aluminum boats, tanks, and tubing.
- Repair leaky radiators and cooling system components.
- Fill dents and cracks in recreational vehicles.
- Rebuild torn screw holes in storm windows and doors.
- Repair seams in rain gutters and downspouts.
- Mend machine parts, castings, and air conditioner housings.
Storage and Shelf Life
QuikAluminum has a minimum shelf life of 24 months when stored at 75°F (24°C). The unused portion of the stick stays fresh for future use when returned to its original packaging. Unlike some lower-cost alternatives that begin to harden and lose effectiveness within weeks, QuikAluminum maintains consistent chemistry and performance throughout its shelf life.
The stick is packaged in a reusable clear plastic tube with a friction top, making it easy to reseal and store between uses.
Specifications
- Size: 4 oz (7" stick)
- Work Life: 5 to 7 minutes
- Functional Cure Time: 60 minutes
- Full Cure Time: 24 hours
- Shore D Hardness at Full Cure (24 hrs): 80
- Lap Shear Tensile Strength on Aluminum (1" x 1" x 1/16"): 500 lbs (3.5 MPa)
- Lap Shear Tensile Strength on Steel (1" x 1" x 1/16"): 600 lbs (4.2 MPa)
- Compressive Strength: 8,000 psi (55 MPa)
- Density: 15.8 lb/gal, 1.9 g/cm3
- Shrinkage: Less than 1%
- Non-Volatile Content: 100%
- Electrical Resistance: 30,000 megohms-cm
- Dielectric Strength: 300 volts/mil
- Temperature Limits - Continuous: -40°F to 250°F (-40°C to 121°C)
- Temperature Limits - Intermittent: -40°F to 300°F (-40°C to 149°C)
- Cured Colour: Light-grey metallic
- Shelf Life at 75°F (24°C): 24 months minimum
- VOC Content: None
- Flammability: Non-flammable
- Country of Manufacture: U.S.A.
Key Features
- Hand-mixable with no tools required: pre-measured activator and base in every stick means you cut, knead, and apply without measuring cups or mixing equipment
- Fast functional cure in 60 minutes: repairs are ready to drill, tap, machine, grind, file, and paint within an hour of application
- 5 to 7 minute work life: enough time to position, shape, and smooth the compound before it begins to set
- Clay-like consistency eliminates drips and runs: the putty stays where you put it, making overhead and vertical repairs manageable
- Seals leaks in aluminum boats and tanks: bonds tenaciously to aluminum and resists water, making it a reliable fix for hull seams and plumbing
- Resistant to a broad range of chemicals: handles hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions, and dilute acids and bases
- Handles extreme temperatures: rated for continuous use from -40°C to 121°C and intermittent use up to 149°C, suitable for engine compartments and outdoor exposure
- No solvents, VOCs, or noxious fumes: safe to use in confined spaces such as bilges and lockers without special ventilation
- Minimal shrinkage after cure: stays flush with the surrounding surface and will not pull away or crack over time
- Resealable packaging preserves unused material: the friction-top plastic tube keeps the remaining stick fresh for future repairs throughout its 24-month minimum shelf life
QuikAluminum Brochure
Comparing PSI Sticks with Others |