Hinges

Butt Hinge 2 in. x 2 in. Stainless Steel Pair

Cast 316 Stainless steel. Pair. 2" x 2". 4 Fastener holes.

Foresti & Suardi 108A.L Polished Brass Strap Hinges 6" x 1-3/16"

Pair of polished brass strap hinges 151 mm x 30 mm x 4 mm

Foresti & Suardi 119.L Polished Brass Butt Hinges 3-3/4" x 2-3/16"

3-3/4" Wide x 2-3/16" High.

Foresti & Suardi 83.L Brass Butt Hinges 2-3/8" x 2-3/8"

Polished brass butt hinges, 60 mm x 60 mm.

Perko 0271DP0CHR Inset Hinge 2-3/4" x 2-1/2"

3/8" Inset.

Perko 0272DP0CHR Flush Hinge 2-3/4" x 1-7/8"

Semi-concealed for overlay doors.

Perko Butt Hinge 3" x 3" Pair

Chrome-plated zinc

Sea Dog 201025 Offset Short Hinge 304 Stainless Steel Pair

Great for interior and exterior applications such as cabinets, hatches, folding tables, or seats where mounting space is tight. Five pre-drilled holes.

Sea Dog 201072 Butt Hinges 2" x 2" Stamped 304 Stainless

These are an economic stamped 304 Stainless steel set of butt hinges.

Sea Dog 201080 Butt Hinges 2" x 3" Stamped 304 Stainless

Pair of corrosion-resistant stamped 304 Stainless steel butt hinges.

Sea Dog 201555 Round Side Two Pin Hinge 304 Stainless 3" x 1-1/2" Pair

Two Pin Hinges open 180°, making them ideal for folding tables or doors that must fold back flat. Good for use in tight spaces.

Sea Dog 201590 Offset Butt Hinge

To be mounted on the front surface of a raised door with a 3/8" offset on one side.

Sea Dog 201914 Semi-Concealed Hinge Stamped 304 Stainless Pair

Semi-Concealed Hinges are designed to be mounted on the back surface of a door having a corresponding 3/8" offset mortised into the edge of the door.

Sea Dog 204280 Hatch Hinge Forged Brass Each

Chrome plated forged brass version.

Sea Dog 204391 Brass Strap Hinge 4" x 1-1/6" Pair

Cast polished brass.

Sea Dog 205140 Butt Hinges 1-5/8" x 1-1/2"

Investment cast 316 stainless steel.

Sea Dog 205280 Hatch Hinge Investment Cast 316 Stainless Each

Investment cast 316 Stainless steel.

Sea Dog 205285 Long Reach Hatch Hinge Cast 316 Stainless Each

Particularly well suited for wider doors or hatches where a greater spread is required on the hinges.

Sea Dog 205390 Strap Hinge 4-1/8" Stainless Steel Pair

Strap hinges consist of two long, narrow leaves of equal length extending from a single knuckle. Commonly used for gates, dock box lids, fish holds, etc.

Sea Dog 205420 Investment Cast Door Hinge Pair

2-1/16" x 2-1/16" Wide with six #10 fastener holes.

Sea Dog 206530 Door Hinge 2-7/8" Zinc Chrome Plated Pair

Sea Dog 221320 Table Brackets 304 Stainless Pair

One 4-piece set includes two wall and two table brackets.

Sea Dog 270250 Deck Hinge Side Mount Stainless Steel 1/4 Pin

Sea Dog Take-Apart Hinges Forged Brass Chrome Plated Pair

Take-Apart Hinges allow a door or lid to be removed after installation without having to remove the fasteners.

Sea-Dog 201030 Door Hinge 2-3/4" x 1-1/2" Stamped 304 Stainless Pair

These door hinges are constructed of corrosion resistant stamped 304 stainless-steel to withstand the harsh marine environment. 2-3/4 x 1-1/2

Sea-Dog 201954 Flush Mount Concealed Hinge 2-3/4" x 1-7/8" Pair

These flush-mount concealed hinges are constructed of corrosion-resistant 304 stainless steel and designed to keep the hinge out of sight when the door's closed.

Short Side Door Hinge 1-1/2 x 2-1/4 in. Stainless Steel Pair

316 Stainless steel. Pair. 1-1/2" x 2-1/4"

Stainless Steel Strap Hinge 6 in. Pair

Victory Strap Hinges 7/8" x 3-7/8" Stainless Steel

Stainless steel strap hinges approximately 7/8" x 3-7/8" in dimensions. Mounting holes approximately 1" on center. Set of two.