Raymarine ITC-5 Instrument Transducer Converter E70010
The Raymarine iTC-5 Instrument Transducer Converter easily converts traditional analog transducer signals, used in i70, ST70+ and ST70 instrument systems into the STng format.
Attached to a Raymarine Multifunction Display, or an i70 Instrument utilizing SeaTalkng, existing transducers for Speed, Depth, Wind, and Rudder Angle can be connected to a STng system with an iTC-5 unit.
The iTC-5 eliminates the need for ST70 pods, and large STng systems can support up to five iTC-5 units.
SeaTalkng connections at the base of the unit simply connect the iTC-5 unit to the SeaTalkng backbone.
Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass).
If you don't have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers
* Note: Fluxgate Compass connection is no longer supported
Raymarine iTC-5 Installation Instructions
iTC-5 and DST-800 Smart Transducer Connection Instructions